VOA MEMS optical switch Features
• Compact
• Low Cost
• High Reliability
• Low IL, PDL, WDL & TDL
• Low Power Consumption
◇VOA MEMS optical switch Application
• Power Control
• Power Regulate
• Channel Balance
• Instrumentation
◇VOA MEMS optical switch Performance
MM VOA | Unit | Typical | |||||
Wavelength | nm | 1310±50 / 1480±50 / 1550±50 | |||||
Insertion Loss1 | dB | 0.8 | |||||
Attenuation Range | 30 | ||||||
Polarization Dependent | Loss | @10dB | 0.15 | ||||
@20dB | 0.25 | ||||||
Wavelength Dependent | Loss | @10dB | 0.20 | ||||
@20dB | 0.40 | ||||||
Temperature Dependent Loss | @10dB | 0.40 | |||||
@20dB | 0.80 | ||||||
Polarization Mode Dispersion | ps | 0.05 | |||||
Return Loss | 45 | ||||||
Response Time | ms | 5 | |||||
Device Resistance | ohm | 100 | |||||
Power Consumption3 | mw | 130 | |||||
Optical Power Handling | mw | 500 | |||||
Operating Temperature | ℃ | -5~75 | |||||
Storage Temperature | ℃ | -40~85 | |||||
Package Dimension | mm | See drawing below | |||||
VOA MEMS optical switch Electrical Driving Instruction
•Pin1 and Pin2 are for control voltage without polarity.
•GND connect to the case. It can be cut. •Do not apply more than 6.5V.
◇ VOA MEMS optical switch Ordering Information:MVOA－A－B－C－D－E－F－G
A | B | C | D | E | F | G | ||
Type | Wavelength | Off State | Package | Fiber Diameter | Fiber Length | Connector | ||
Drive Voltage | 13: 1310nm | 1:Transparent | 6:Φ6mm | 25:250um | 05:0.5m | OO:None | ||
5:5V | 14: 1490nm | 2:Opaque | 3:Φ3.5mm | 90:900um | 10:1.0m | FP: FC/PC | ||
3:3.5V | 15: 1550nm | 15:1.5m | FA: FC/APC | |||||
162: 1625nm | SP: SC/PC | |||||||
165: 1650nm | SA: SC/APC | |||||||
13/15:1310/1550n | LP: LC/PC | |||||||
m | LA: LC/APC | |||||||
