Power Plug Integrated Tester
1 Test automatically.
2 programmable control system and human-machine interface.(touch screen)
3 Test speed is quick; all test subjects will be achieved less than 2 seconds.
4 The PLC control system comes from Mitsubishi(Japan).
5 The relay comes from Schneider(French).
6 The specimen is incompetent within an alarm.
7 If the specimen is incompetent, this machine will stop at once and show you which subject is incompetent.
8 When test over, the specimen will be pushed out automatically within a mark.
9 both 3-wire and 2-wire power plug can be tested
10 Both for single & double head.
Product explanation:
HD-602A plug integrated testing machine, is use to test power plug line conduction, polarity, insulation, compression, leakage current five items. This equipment adopts the programmable control system and human-machine interface. Feathers all round, high accuracy, easy to use, long service life. Qualified products will be pushed out with a mark to prevent undetected or unqualified product mixed. Save cost and improve production efficiency.
Technical parameter:
Item | Explanation | |
High volt test | KV output voltage | 0-5KV MAX5mA |
HV output voltage | 0-5KV MAX10mA | |
Rated power | 500VA | |
waveform | 50/60Hz Exchange sine wave | |
Voltage calibration | +/-5% within | |
High volt indicator | proportion | 1:25 |
precision | +/-3% | |
Failure judgment | judgment | *Measured values over basic value. *Cut off the output voltage, give a failure signal. |
HV current leakage fixed value | 0.5,1,2,3,5,10mA | |
KV current leakage fixed value | 0.5,1,1.5,2,5mA | |
