Introduction
1Johnosn screen is made up of rods and profile wire.
2.The rod can be round wire,triangular wire or trapezoid wire
3.The profile wire is triangular wire (V-shaped wire).Wedge wire screen has a structure and high open
area,as well as accurate slot dimension.
4.At the same time,water well screen have heat-resisting,anti-corrosive,good machine capability,
last long,safety and reliability and so on characteristics.
5.It can be used in many kinds of medium filtering.
Introduction
1.Continuous Slot Wedge Wire wound Well Screens consist of Vshape profile wire and the longitudinal support rods.
2. Each intersecting point of wires of Continuous Slot Wedge Wire Screens is fusion welded, so it has sturdy construction and good mechanical property.
3. The Vshape section plane of Continuous Slot Wedge Wire wound Well Screen can avoid blockage, and make sure of the unimpeded water.
4. The consecutive slot of our Continuous Slot Wedge Wire wound Well Screens have more open area, and Continuous Slot Wedge Wire wound Well Screen can reduce the speed of the water entering to avoid the sand entering the screen under the great pressure, so it can filter sand better.
5. The slot can change according to the real condition of the earth.
Application
screens is used for water filtering and sifting in the following industry:
· Petroleum
· Chemical industry
· Pharmacy
· Food and beverage
· Metallurgy
· Coal mining
· Environmental protection
SIZE | O.D | SLOT | LENGTH | COLLAPSE | TENSILE | WIRE SIZE (MM) | RODS |
4 | 117 | 0.040 | 3 | 395 | 6 | 2.2*3.0 | 3.8MM/22 |
4 | 114.3 | 0.040 | 3 | 395 | 6 | 2.3*3.0 | 3.8MM/22 |
6 | 168.3 | 0.040 | 3 | 252 | 8 | 2.3*3.5 | 3.8MM/32 |
8 | 219.1 | 0.010 | 3 | 399 | 10.5 | 3.0*5.0 | 3.8MM/48 |
8 | 219.1 | 0.020 | 3 | 370 | 10.5 | 3.0*5.0 | 3.8MM/48 |
8 | 219.1 | 0.040 | 3 | 323 | 10.5 | 3.0*5.0 | 3.8MM/48 |
10 | 273.1 | 0.010 | 3 | 206 | 11 | 3.0*5.0 | 3.8MM/50 |
10 | 273.1 | 0.020 | 3 | 191 | 11 | 3.0*5.0 | 3.8MM/50 |
10 | 273.1 | 0.040 | 3 | 167 | 11 | 3.0*5.0 | 3.8MM/50
|
Specification (wedge wire): | Width(mm): 1.50 1.80 2.30 3.00 3.30 3.70 |
Specification (support rod): | Width(mm): 2.30 3.00 3.30 3.70 |
Note: other specifications available as per request from tianzhiwo Factory | |
Slot size: | 0.10, 0.15, 0.20, 0.25, 0.30^ 6.00mm also achieved upon request. |
Material: | galvanized low carton (LCG), stainless steel (304,316 etc.) |
Length: | up to 6 meters |
Diameter: | from 25mm to 1200mm. |
