Waste engine oil distillation plant(Waste engine oil distillation plant:ｗｗｗ．ｔｉｒｅｒｅｃｙｃｌｅｍａｃｈｉｎｅ．ｃｏｍ) is self-shunt vacuum distillation unit, distillation system uses a tube furnace (independent research) heating the continuous distillation process under negative pressure to be waste oil distillation.Because the waste oil contains large amounts of water so we should dehydration before distillation.
Engine oil is a necessity for all kinds of vehicles, if you want your can works properly, you have to change engine oil for your car, every once in a while. Then, here comes a problem, what will do with the waste engine oil, many people may have not concerned about this. But you must know that waste engine oil could produce bad environmental pollution. We have the responsibility to take care of our environment, we must find a way to recycle waste engine oil, avoiding pollution it may cause.
Production Process
The cold materials (waste oil) should be pre-heat exchanger with the overhead vapor phase component first.Materials after heat exchange into the falling film evaporator using secondary heating flue gas dehydration,and then through the tube furnace heating again after after the temperature meet the process requirements into ectification within the column Control reflux ratio at the same time, On the top of the gas phase components after heat exchange with the raw condensation receiving tank into the light components, To restructuring after restructuring of condensing tank,Tank bottom components into the slag,Non-condensable gas back into the tube furnace combustion after water seal.
Final Products And Application
Waste oil distillation machine can purify waste tire oil, plastic oil, waste engine oil, the final diesel can be used for tractors, trucks, and diesel oil generators, ships etc.
Technology Characteristics
① New approaches of the project techincal, economic, and ecological benefit is remarkable,greatly saves the cost of production,but also save the equipment investment,widen the elasticity of poeration,also has brought great convenience to production operation.
② Raw material and product continuous beat exchange for many times,to realize the continuous cycle of heat energy utilization.
③ Rectification is under negative pressure, reduce the reaction temperature, saves energy and reduces the production cost, but also avoid the waste oil cracking at high temperatures.
④ By adiusting the reflux ratio ensure the color of the product.
