TRZ-2017 full automatic conical paper tube production line includes three parts: reeling part, drying part and after finishing part. It needs no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming and the main engine transmission uses cam timing mechanism. Each position takes double speed variable frequency control technology. The none mechanical abrasion photoelectric control, approaching control and pneumatic delay control are also applied, which realizes the mechanical and electrical integration. It achieves low labor, low consumption, high efficiency and high quality, which is suitable for the production of conical tubes with various specification. All bearings used in the machine are Japan NSK bearings.
Process:
Raw paper rolling---Internal and external printing---Edge grinding---Cutting---Reeling---Drying---Collating---V-shaped opening cutting---Opening polishing---Line pressing---Head reflecting---Galling---Product finishing
Main parameter
Type: conical paper cones with various tapers
Power: 49.2kw
Speed: 25pcs-50pcs/ min
Size: 14000mm*6000mm*3800mm
Operator: 1
Weight: 14T
Appliable paper size: 320gsm-450gsm
Appliable glue: white glue/starch glue
Compressed air: 1.2m3/ min, 0.8mpa
1. TRZ-2017 full automatic conical paper tube production line reeling part
TRZ-2017 full automatic conical paper tube reeling machine is suitable for conical tubes of various specifications, which molds at a time. After hanging the paper roll, internal and external printing, edge grinding, cutting, reeling and head cutting, the high-strength semi-finished paper tubes with same caliber and tapers will be sent to the dryer. The reeling machine takes double speed various frequency control technology. The reeling speed can be adjusted automatically. The whole process is connected with the drying machine, simplifying the complex system to achieve twice the result with half the effort. It is suitable for conical tubes with various tapers and calibers. All bearings used in the machine are Japan NSK bearings.
Main parameter
Type: conical paper cones with various tapers
Speed: 25pcs-50pcs/min
Power: 13.27kw
Size: 6080mm*2240mm*1500mm
2. TRZ-2017 full automatic conical paper tube production line drying part
TRZ-2017 full automatic conical paper tube production line drying part with auto-temperature control uses chain-type circulation and thermal cycle drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome. Paper tubes can be feed and collected automatically after connected with other equipment. All bearings used in the machine are Japan NSK bearings.
Main parameter
Type: conical paper cones with various tapers
Speed: 25pcs-50pcs/min
Power: 10.1kw-24.5kw
Size: 5620mm*1700mm*3800mm
3. TRZ-2017 full automatic conical paper tube production line after finishing part
TRZ-2017 full automatic conical paper tube after finishing part is designed to turn the semi-finished products into high-quality conical paper tubes after cutting V-shaped opening, grinding, pressing, reversing, galling, automatic counting and stringing, which molds at one time. The speed of the machine can be adjusted freely. The reliable over-loaded protection and non-normal stop equipment guarantee the safety and stability of the process and lower the waste rate. The machine can be used with principle machine or be used individually as well. It is very suitable for conical tubes with various tapers and calibers. All bearings used in the machine are Japan NSK bearings.
Main parameter
Type: conical paper cones with various tapers
Speed: 35pcs-50pcs/min
Air pressure: 0.3mpa-0.4mpa
Size: 2600mm*1600mm*1580mm
3.1 TRZ-2017 full automatic conical paper tube production line after finishing machine
TRZ-2017 full automatic after finishing machine is designed to turn the semi-finished products into conical paper tubes, which molds at one time. The machine is very ideal after finishing equipment of high quality conical tubes. It has step-less transmission, which can be adjusted freely and be able to work in the production line or be used individually. It is suitable for conical tubes with various calibers and tapers. All bearings used in the machine are Japan NSK bearings.
Process:
Automatic feeding---Automatic distributing---Head reflecting---V-shaped opening cutting---Line pressing---Galling---Automatic counting---Automatic string
Main parameter
Type: conical paper cones with various tapers
Speed: 30pcs-45pcs/min
Power: 11kw
Air pressure: 0.4mpa-0.5mpa
Size: 2940mm*2780mm*1430mm
Operator: 1
