Balance Density Measuring Apparatus

Density Tester according to ISO 1183

Standard Parts.
First, you should open carefully the packaging density of components, as figure 1 should include the following components.
1) Manual instruction
2) Vessel support
3) beaker
4) fix support
5) floating solids link
6) floating downward solid
7) thermometer
8) wetting reagent
9) 10ml falling hammer
10) scale support 1 (Used for AR / EP Analytical Balance)
11) scale support 2 (Used for CAV Analytical Balance)
12) scale support 3 (Used for the balance of CP)


Density determination for balance.

The chapters will introduce the use of balance of solid and liquid density before the prepare work, as following in details (see right picture)
1. Select the appropriate scale support for balance will be torn stickers sticker will be shoring-iron nail in the bottom of fixation (based paste at the bottom of the marker position).
2. Remove sliding doors that open balance disk:
3. Fixator to move into areas that have been set in the balance, and balance of the middle of the new agreement.
4. Stent placement of the containers above the fixator to support two feet in the weighing arm fixation in the middle, and ensure that the containers do not meet stent fixator