1.Diameter: 1.0mm-100.0mm
2. Density: 15.8-18.75 g/cm3
3.Composition: W content: 85-99%, W-Ni-Fe, W-Ni-Cu
4.Surface: Sintering surface, Forged surface, Ground surface.
Tungsten alloy balls are widely used in Ball valve and Bearing. We can offer various grades and sizes .And the stringent requirements of each procedure to ensure that the products produced comply with your request. We adopts the advanced technical and depend on the imported material .The ball has the high endured causticity and high endure grind, which could improve the life of the bearing, while elevate the value of your products.
High Density Tungsten alloy fishing sinker is made from tungsten alloy.
The advantages: nuisance free, international environment protection standard, small body, high density, strong wind resistance. It is the ideal substitute of lead sinker which finds good sales
among western countries.
Physical and mechanical properties:
| Material | Density ( g/cm3 ) | Tensile Strength ( Mpa) | Elongation ( % ) | HRC |
| 85W-1.5Ni-4.5Fe | 15.8-16.0 | 700-1000 | 20-33 | 20-30 |
| 90W-7Ni-3Fe | 16.9-17.1 | 24-32 | ||
| 90W-6Ni-4Fe | 16.7-17.0 | 24-32 | ||
| 91W-6Ni-3e | 17.1-17.3 | 25-28 | 25-30 | |
| 92W-5Ni-3Fe | 17.3-17.5 | 18-28 | ||
| 92.5W-5Ni-2.5Fe | 17.4-17.6 | 25-30 | ||
| 93W-4Ni-3Fe | 17.5-17.6 | 15-25 | 26-30 | |
| 93W-4.9Ni-2.1Fe | ||||
| 93W-4.9Ni-2.1Fe | ||||
| 93W-5Ni-2Fe | 17.9-18.1 | 700-900 | 8-15 | 25-35 |
| 95W-3.5Ni-1.5Fe | ||||
| 96W-3Ni-1Fe | 18.2-18.3 | 600-800 | 6-10 | 30-35 |
| 97W-2Ni-1Fe | 18.4-18.5 | 8-14 | ||
| 98W-1Ni-1Fe | 18.4-18.6 | 500-800 | 5-10 | |
| 90W-6Ni-4Cu | 17.0-17.2 | 600-800 | 4-8 | 25-35 |
| 93W-5Ni-2Cu | 17.5-17.6 | 500-600 | 3-5 |
Attn:Jessie Yang
E-Mail:sales01(AT)sxxinheng.com/topsales1586(AT)yeah.net
