HZ2016 CNC Ring Die Drilling Machine

HZ2016 CNC Ring Die Drilling Machine  HZ Series CNC Ring Drilling Machine  Usage and Characteristics :  1. This machine is mainly used on ring form materials' radial drilling. The self central chuck work table is put in horizontal position. The chuck is four claws inner-chuck. The chuck is of clamp positioning, workpiece circal CNC rotary indexing, drilling power head move from the workpiece axis to digital display side for positioning. Two axes CNC control.  2. Workpiece indexing driven by servo motor driven high precious gear, workpiece axis digital display positioning manually through ball screw and guide rail.  3. Workpiece feed-in is driven by ball screw. During processing can automatic, precious, fast positioning, can finish drilling automatically. Highly improve the precious and speed of drilling, ensure the interchangbility of workpiece. Also avoid the possible of workpiece repair or invalidated due to manual positioning and residual of drilling.  4. The control of the machine is CNC  5. Circulating cooling system, reducing unproductive time, lower labor intensity. What the operator only need to do is to fix and pull down the workpiece and change drill.  6. Advanced numerical controlled drilling power head, no data need to be set, can process idle stroke fast feed-in,low speed workpiece feed-in,change of rapid return after drilling through.  7. Fast chuck equipment, which makes change of drill easy,convenient and fast.  8. Two axes CNC control, CNC,PLC control, CRT display.  9. The dimension of workpiece input into control system, once input can be used repeatedly.  10. CNC controlled rotating worktable.  11. Clamping the part manually.  12. Cooling liquid automatic circulation.  13. Fast forward,workpiece feed-in of stroke of the drill can be controlled automatically, fast return after drilling through.  14. The equipment are of high quality, with high reliability.  Technical parameters:      Workpiece dimension      inner diameter: Ø280-Ø880      Outer diameter:Ø300-Ø900      Height: ≤400mmMax drilling diameter(mm)Φ30Morse taper gauge of spindleSize 3Feed-in length320 mm(equipped with longer drill bushing for drilling small workpiece)Rotating speed of spindle(rpm)100-760Drilling speed30-160mm/minSpeed governing moldspindle rotating speed, using frequency converter stepless speed adjust      spindle feed-in speed, CNC control stepless speed adjustSpindle motor power(kw)3Servo motor power of feed-in spindle(kw)1.5Servo motor power of rotating motor(kw)1.5Hydraulic station motor power(kw)3Cooling pump motor power(kw)0.25Processing position accuracyCircular direction:±30′Axis(Y height)direction: manual positioningHZ2016 CNC Ring Die Drilling Machine Videos