1045 /1020 steel bearings Adapter Sleeve,surface treatment,inch/metric sleeve,Conical sleeve,H2/H3 Series Adapter Sleeve
"Adapter sleeves are using for locating bearings with a tapered bore onto a cylindrical seating as they can be used on smooth or stepped shafts. They are easy to mount and require no additional location on the shaft. When adapter sleeves are used on smooth shafts, the bearing can be located at any position on the shaft. When used on stepped shafts, together with an abutment ring, bearings can be accurately positioned axially and bearing dismounting is also facilitated
Basic design
Adapter sleeves are supplied complete with lock nut and locking device. Smaller sizes use a lock nut with a locking washer, larger sizes use a nut with locking clip. The sleeves are slotted and have an external taper of 1:12. Metric adapter sleeves, series designations H and OH-metric adapter sleeves for shafts with inch dimensions, series designations HA, HE and HS-adapter sleeves with inch dimensions, series designations SNW and SNP
Materials
The materials using in adapter sleeves are carbon steel with a tensile strength at least 430N /mm2,
Dimensions
The dimensions of metric adapter sleeves are in accordance with ISO 9001; except the bore diameter of metric sleeves for inch shafts.The dimensions of Adapter sleeves with inch dimensions are in accordance with ANSI/ABMA Std. 8.2-1991.
Tolerances
The bore diameter of metric adapter sleeves is to tolerance JS9, the width to h15.The tolerances of adapter sleeves with inch dimensions are in accordance with ANSI/ABMA Std. 8.2-1991.
Thread
Metric adapter sleeves up to size 40 have metric threads with 6g tolerances, according to ISO 9001. Larger adapter sleeves have metric trapezoidal threads with 7e tolerances, according to ISO 2903:1993.Adapter sleeves with inch dimensions up to and including size 64 (12 inch shaft diameter) have Unified Special Form threads (based on the old American National form, class 3 design). Larger sleeves have Acme Class 3G, General Purpose threads.
