Low Iron Ar Coated Toughened Solar Sheet Glass for Solar Energy System

If you want to buy discount and quality low iron ar coated toughened solar sheet glass for solar energy system made in China, you can contact Migo Glass which is one of the best manufacturers and suppliers of low iron ar coated toughened solar sheet glass for solar energy system in China. We have a professional factory at your service, please feel free to wholesale cheap and customized glass products in stock at a reasonable price with us.Basic InfoModel NO.: ARSG32Appearance: Flat TemperedSteel Degree: Super-Tempered GlassThickness of Curve Tempered Glass: NoneTechnics: Physically TemperedUsage: Solar PanelThickness: 3.2mm, 4.0mmIron Content: Less Than 0.012%Trademark: Migo GlassSpecification: ISO, CE, SPF, SGSHS Code: 70071900Shape: FlatStandard: GB15763.2-2005Thickness of Flat Tempered Glass: 3.2mmFragment State: ≥40 particles in 50*50mmFlatness: High ClassMaximum Size: 1200*2200mmSolar Transmittance: Over 93.6%Application: Solar Panel, Solar CollectorPackage: Wooden Cases with Paper InterlayerOrigin: Qingdao, ChinaProduct Description 3.2mm Low Iron AR Coating Tempered Solar Glass for Solar Panel, combined with nanometer anti-reflective coating technology,increase solar transmittance by way of decreasing light reflectance and improve the solar  cell phtotelectric conversion efficiency.Meanwhile,it reduces the reflected glare of the glass and the pollution caused by the reflectance to the environment. The hydrophobic behavior of the AR coating could in some degree protect the dust and dirt from shading the light and improve the cleaning performance of the glass. With the outstanding characteristics of the high solar lights transmittance, the low reflectance, the low iron, the high mechanical strenght and the high flatness, it is one of the indispensable important parts of solar cell and has been widely used to photovoltaic power generation all over the world.ProductsLow Iron AR Coating Tempered Solar Glass for Solar PanelThickness3.2mm,4.0mmSizeCan be customized,maximum size:1200*2200mmSolar transmittance3.2mm>93.6%,with AR coatingApplicationsFor solar cell modulePayment termsT/TDeliveryWithin 20 days after receiving the deposit MOQ2500 sqmPortQingdaoFeatures of our 3.2mm Low Iron AR Coating Tempered Solar Glass for Solar Panel:1.     High solar lights transmittance2.     The low reflectance: visible light reflectance is less than 7.30%3.     Low iron:glass has only 0.012% of iron content;4.     High intensity,the strength is 3-5 times of ordinary annealed glass5.     Wind pressure resistance: the wind pressure resistance is 1.5-3 times of ordinary annealed glass;6.     Heat shock resistance: the heat shock resistance is 3 times of ordinary annealed glass;7.     Safety:if it is broken, it usually breaks into relatively small pieces, which are less likely to cause serious injury. Test Standards Test method Results 1 Appearance EN1096-2 Surface is clean, no scratches,spots or pinhole Qualified 2 Light transmittance ISO 9050 The ratio after coating is higher than before >2.5>2.6 3 Adhesion ASTMD3359 The cutting edge is very smooth , no grid slide, 0 level4 Pencil hardness ASTMD3363 No thickness of film which scratched by pencil more than 3mm≥6H 5 Salt spray test EN1096-2With 5%(±1)NaC1,under 35ºC,last 4-9days,record  the data before and after the test, T<1.0 4 days,      T=0.57   9 days,      T=0.91 6 Thermal CycleIEC61215/10 Keep the temperature between -40ºC and 85ºC,±2ºC,200 times,(around 1000 hours),record  the data before and after the test,T<1.0 T=0.48 7 Muggle Test IEC61215/10 Under 85ºC,±2ºC,relative humidity is 85ºC,±5ºC,around 1000 hours,record  the data before and after the test,T<1.0 T=0.638 Wet-cold test IEC61215/10 Humidity is 85,±5ºC,temperature is 85ºC,±2ºC,fall to -40ºC,cycle for 10 times.Record  the data before and after the test,T<1.0 T=0.80 9 Outdoor exposure IEC61215/10 Test with the moniter in outdoor temperature,total radiation need to be 60kmh·m-2 .Record  the data before and after the test,T<1.0 T=0.59 10 Mechanical Loading IEC61215/10 Adding the load to 2400Pa and make it distributed.Keep 2-3 times;the layer wasn't broken and no serious defects in appearance Qualified Any inquiry, feel free to contact us, you will get the best glass from us!!!