Two patch pocket with flap on breast, flap with 0.6cm wide single line pro-stitch, pocket with double line pro-stitch , closure with invisible snap button. Front body reflective strip go through the breast pocket and flap to form a straight line, the process requirement is more precise.
Slant pocket and air pocket on the two side of the pant, can touch the inner clothing through this air pocket, pocket mouth and flap were strengthened with bartack which can extend the service life of the pocket.
Patch pocket with flap on the hip, with double line pro-stitch, closure with invisible snap button. Double layer folding at the bottom of the pocket, more secure.
Turn-ups sleeve cuffs with splits, sleeve placket rooftop, cuff closure with snap button and size can be adjusted, much practical.
The seam on the waist was covered by the reflective strip, elastic band on the two sides of waist and is adjustable, suitable for different size of people.
Front part of upper body was jointed by two pcs fabric, with 0.6cm single pro-stitch.
All snap buttons are invisible one, the stem of the metal snap button not touch the naked skin. Can separate the wearers' from the heating very well.
One piece FR warning reflective strip on the waist, two pieces FR warning reflective strip on the arms and legs, two crossed FR warning reflective strip on the back, all with single pro-stitch. Much modern and conspicuous.
Shoulder seam and armhole pieces was sewed with five wire and double visible stitch. Pretty stitch and high strength.
Double pro-stitch for pant outseam, good appearance and strength
Front opening of pant closed with double closed metal, much practical.
Beautiful upper front placket, neck and waist line closed with snap button.
More details
Standards
| ASTM F1506 | Standard Performance Specification for Flame Resistant and Arc Rated Textile Materials for Wearing Apparel |
| ASTM F1959 | Standard Test Method for Determining the Arc Rating of Materials for Clothing |
| EN ISO 11611 | Protective clothing for use in welding and allied processes |
| EN ISO 11612 | Protective clothing – Clothing to protect against heat and flame |
| EN ISO 14116 | Protective clothing - Protection against heat and flame |
| IEC 61482-1-2 | Protective clothing against the thermal hazards of an electric arc |
| NFPA2112 | Standard on Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire |
| NFPA70E | Standard for Electrical Safety in the Workplace |
| Oeko-Tex Standard 100 Class 2 | Tested for harmful substances, approved to be used in direct contact with skin |
Size Chart
Measurements are in inches.
| Size | Neck | Chest | Waist | Sleeve |
| S | 14 - 14.5 | 34 - 36 | 28 - 30 | 32.5 - 33 |
| M | 15 - 15.5 | 38 - 40 | 32 - 34 | 33.5 - 34 |
| L | 16 - 16.5 | 42 - 44 | 36 - 38 | 34.5 - 35 |
| XL | 17 - 17.5 | 46 - 48 | 40 - 42 | 35.5 - 36 |
| 2XL | 18 - 18.5 | 50 - 52 | 44 - 46 | 36.5 - 37 |
| 3XL | 19 - 19.5 | 54 - 56 | 48 - 50 | 37 - 37.5 |
| 4XL | 20 - 20.5 | 58 - 60 | 52 - 54 | 37.5 - 38 |
| 5XL | 21 - 21.5 | 62 - 64 | 56 - 58 | 38 -38.5 |
Hint: For the most accurate results, measure yourself in your undergarments.
Neck: Measure around the base of your neck, inserting your forefinger between the tape and your neck to allow ease in fit.
Chest: Measure around the fullest part of your chest, keeping tape firmly under your armpits and around your shoulder blades.
Waist: Measure around your waist, slightly below your natural waist, where you normally wear your pants. Insert your forefinger between the tape and your body to allow ease in fit.
