12 Litre 15 Litre PC Bottle Blowing Machine | 12L 15L Polycarboante Bottle Making Machine
Type: Raw Material to Bottle (no need of Preforms)
Feed material: Polycarbonate (PC) raw material (in granules)
Bottle volume: 5 or 3 gallons
Production capacity: 60 pcs/hour (5 gallons)
1) Plasticizing System
Screw Diameter (mm): 85
Ratio of Screw Length/Diameter (L/D): 28
Plasticizing Rate (kg/hr): 80
Injection Stroke (mm): 360
Screw Speed Range (rph): 10-56
2) Clamping System
Clamping Force (kN): 190
Clamping Stroke (mm): 350
Mould Thickness Range (mm): 370-410
Max Opening between Platens (mm): 720
3) Power Consumption
General Power (kW): 84
Hydraulic Motor (kW): 37
Electrical Heating Power (kW): 44
Average Electricals Power Rating (kW): 58
4) Air Source Connection
Required air source pressure: min. 6-10 bar; Air consumption: 0.4M3/min..
5) Water Source Connection
Required water pressure: min. 2-3 bar; Water consumption: 6M3/min.
6) Control System
100-point wall thickness control, 6" colour display.
7) Machine Dimensions
4,985(L) x 1,465(W) x 2,765(H) mm
8) Machine Weight
6 tons (not including hydraulic oil and mould)
9) Production Capacity
>= 60 bottles/hour (based on qualification rate of 98%)
---
What do you need to prepare for making PC (Polycarbonate) Bottles?
PC resin granules in bags. Simple and the PC resin is easy to buy locally.
Process:
1. Feed PC resin in the Hopper Dryer on the floor.
2. The PC resin is loaded into the Hopper Dryer on the machine top through the Autoloader.
3. PC resin is melt in the machine.
4. Melt PC resin coming into the mould.
5. Melt PC resin is shaped into a bottle in the mould.
6. The mould is open and take out the bottle.
Very simple. Easy to buy material and easy to operatre.
What kind of bottles does the machine can make?
2-5 gallon bottles with or without handle.
