2BE Liquid ring vacuum pump
china cast iron vacuum pump
2BE
CONSTRUCTION TYPE
The 2BE liquid ring vacuum pumps are displacement pumps of uncomplicated and robust construction with the following particular features:
non-polluting due to nearly isothermal compression
oil-free, as no lubrication in the working chamber
handling of nearly all ga ses and vapours
small quantities of entrained liquid can be handled
easy maintenance and reliable operation
low noise and nearly free from vibration
wide choice of material, therefore applicable nearly everywhere
shaft not contact with the medium
protection against cavitation as standard
incorporated dirt drain
incorporated central drain
no metallic contact of the rotating parts
The liquid ring vacuum pumps EMC 2BE are single-stage ones.
APPLICATION of industry liquid ring vacuum pump
Handling and exhausting of dry and humid ga ses; entrained liquid can be handled during normal duty. The pumps are applied in all fields where a pressure of 33 to 900 mbar must be created by robust vacuum pumps.
NOTE
During operation the pump must continuously be supplied with service liquid, normally water, in order to eliminate the heat resulting from the gas compression and to replenish the liquid ring, because part of the liquid is leaving the pump together with the gas. This liquid can be separated from the gas in a liquid separator (see catalogue part accessories).
It is possible to reuse the service liquid. The pumps are equipped with a device by which the contaminated service liquid can continuously be drained during operation (dirt drain), if necessary.
We are Liquid Ring Vacuum Pumps supplier.
The operating data are applicable under the following conditions:
water vapour saturated air: 20°C
service liquid: - water: 15°C
Compression pressure 1013 mbar (atmospheric pressure) ----38V/50HZ
Material design
HT200
SS304
SS316L
Pressure range: 33 to 1013 mbar
Suction volume flow: 600to 7500 m³/h
