Diesel engine driven sewage pumps non clog centrifugal pump for iron and steel
Typical application
It is specially used for the city water supply, the sewage and effluent treatment, chemical, iron&steel industries and the paper,sugar & caned food industries. It can deliver all kinds of sewage, clear water, seawater, bittern water, waste water and sludge so that it can be used in water supply plant , sewage treatment works, breweries, mines as well as the chemical and construction industries. Type KN Series pump normally is suitable for delivering the neutral media( PH value is 6-8 about ). For the application of corrosive fluid and other special requirements please quote this information when making order.
Operating limited
Inlet Diameter:2.5~20 inch (65~500mm)
Discharge Diameter: 1.5~20 inch (40~500mm)
Flow Capacity: 8~4500m3/h
Head: 1~100m
Features
• High efficiency,Non-clogging,Reliable operation,Little vibration,Low noise, Easy maintenance
• The series KN Series pump is supplied with 4 kinds of impeller for selection.
'B' impeller-closed non-clogging impeller. For clear water, the sewage and fluids containing solids and sludge which do not liberate gas.
'D' impeller-Closed multi-vane impeller . For clear water, the fluid containing slight suspension such as treated sewage, screen water, pulp water,sugar juices,and so on.
'E' impeller-Open impeller .Same applications as 'N' impeller but also including fluids containing air.
'Z' impeller-Free-flow impeller .For fluids containing coarse solids liable to bunch or plait(such as long fiber admixtures, sticky particles and so on)and fluids containing air.
• Shaft seal:
| Gland seal | there are two kind of design:standard's and high-temperature's. The high temperature type should be used when the temperature is higher than 90℃. The stuffing box of this type can be cooled in order to be suitable for the transporting duty in high temperature. |
| Mechanical seal | It also can be used for the application where leakage is not allowed. |
Material (Wet parts)
Usually,Pump casing is made of cast iron;impeller is made of cast iron;Shaft is made of 45# steel,stainless steel.
The materials of the wet parts could be changed depending on the requirements of the customers.
Metal:
Wear-resistant metal: A61, A05, A07, A11, A01
Anti-abrasive, anti-corrosive metal: A49, A33
Anti- abrasive metal: A22, A23, A25
Other optional metals or alloys: Duplex stainless steel, stainless steel, nickel cast iron, brass, bronze, etc.
KN series Non-Clogging Water Pumps are the single stage, axial suction and cantilever non-clogging centrifugal pump. There are four types of impeller for selection.
'B' impeller - closed non -clogging impeller;
'D' impeller -closed multi-vane impeller;
'E' impeller -open impeller;
'Z' impeller -free-flow impeller;
Our service:
Delivery: delivery time will be on times as the contract. Usually, the delivery time is of centrifugal pump is for 20-25 working days.
Warranty: one year for the pump body, 3 months for the main working parts.
Package: according to your quantity, we use plywood case which is durable for ocean transport.
Shipping: By sea and by air
Payment: we can accept T/T, L/C, West union and so on.
Pre-sales service: according to your requirement, we will give you our professional advise of pump solution.
On-sales service: we will clearly show you everything in fact when you place an order with us. We will takes photos or videos to show you our production situation.
After-sales service: we will full report you the production progress and plan. Meanwhile, we will follow up the pump working conditions per three months when the pump put into use, and can send the spare parts to you within one week if you need.
