UD0001 USB-C M.2 NVME SSD Enclosure
C-Smartlink UD0001 USB-C M.2 NVME SSD Enclosure, ABS Shell
This pocket-sized ABS enclosure is a DIY kit for assembling M.2 NVMe SSD(PCIE-based), and the speed is USB3.1 Gen2 10Gbps, which is specially designed for mobility, with an ultra-portable design that fits easily into your laptop bag.
1. Ultrahigh Speed
USB 3.1 Gen2 Port supports data transmission speeds of up to 10Gbps for steady and efficient data transfer.
Backward compatible with USB 3.1 Gen1 and USB 3.0 at respective speed limits. Provides transfer speeds of more than 900MB/s, that's around 9x faster than taditional external HDDs. Transfer and backup large-sized data files and 4K videos in seconds. We are USB c 3.1 Hub Factory.
2. Never slow down
It will keep high speed even if after several hours of continuous work.
3. Auto Sleep ( 5 mins)
For energy-saving & reducing power consumption & heat dissipation & prolonging SSD life.
4. Low Temperature
Master IC works with lower temperature.
High quality ABS enclosure with UV plating, tactility temperature feeling lower.
5. Easy Setup
Hot-swappable; Fully bus powered; Plug and Play; No Driver required.
6. Broad Applicability
It works for mobile, tablets, laptops, desktop computers and other hosts that are equipped with USB Type-C and Thunderbolt 3 ports.
7. Special Applicability
Only applicable for M.2 NVMe M-Key or B+M Key SSD
(PCIE-based). DOES NOT support M.2 SATA based SSD
(NGFF). Applicable to 4 sizes of SSD: 80mm (2280), 60mm (2260), 42mm (2242) and 30mm (2230).
8. System Compatibility
Support Windows 7 or above, Mac OS 10/10.5 or above, Linux, Android, iOS
Warm Reminder:
1. Only support NVMe M-Key or B+M Key M.2 SSD (PCIE-based). DOES NOT support M.2 SATA based SSD (NGFF), and Not Support PCIe AHCI M.2 SSD.
2. To realize 10Gbps data transmission rate, the USB 3.1 interface on source devise should be USB 3.1 Gen 2. For some sources comes with USB 3.1 Gen1, then the max
speed is 5Gbps.
3. It is normal that the case heats up since the high-speed NVMe M.2 drives generate a lot of heat while working.
4. Most of the new SSD need to be initialized, partitioned and formatted.
click to visit our website.
