Product Application:
In tower cranes, wind turbines, high-pole lights, metallurgy, iron towers (electricity, communications, microwave, etc.), chimneys (thermal power plants, coking plants, chemical plants, etc.), high-rise buildings, large Bridges, large port machinery, large engineering machinery, wind turbines and other occasions that need to play a warning role on aircraft.
Main functions and features:
● Light source for LED, using imported international advanced long life, low power consumption, high efficiency chip package.
● The use of low illumination, high efficiency solar panels, with special solar battery for power supply.
● The control circuit adopts the special controller for flashlight with micro power consumption, which reduces the energy consumption of the control circuit and greatly improves the reliability of the product.
● Battery use advanced power management system, in the battery undervoltage, overvoltage, floating charge and other aspects of comprehensive protection, effectively improve the service life of the battery.
● Using conventional lithium iron phosphate battery, easy to replace.
● PC material, with anti-bird device, has a particularly good impact strength, thermal stability, gloss.
● The shell adopts aviation aluminum alloy material, with light weight, corrosion resistance and other advantages.
● Photoelectric automatic control function.
● Lamps and lanterns work continuously for more than 10 days in rainy days (can be customized).
● Flicker type or steady on type can be switched.
● Optional accessories: mounting bracket.
● Sealing material: waterproof sealing ring.
● Flame retardant level: UL94-V0.
Product Parameters:
ICAO-type A low light intensity obstacle lamp standard, and FAA L-810 standard
The power supply voltage: DC3.7 V / 6 ah lithium battery
Working mode: Constant light 10CD/flashing ≥ 32.5CD (special frequency can be customized)
The effective intensity : 10 CDS/acuity 32.5 CD
The average power consumption: 2.5W
The light source type : LED
Emitting light colors : red/ yellow/ blue/ white
Horizontal luminous Angle :360 °
Vertical luminous Angle :10 ° or higher
Light life :100000 hours or more
Overall dimensions :φ 162 × 160 (mm)
Installation dimensions :Section circle φ 140 uniform cloth 4 holes M6 (mm)
Light control ambient brightness :50Lux
Solar panel parameters :3W6V
Continuous cloudy and rainy working days > 7 days
Protection grade :IP68
The environment temperature :-40C ~ 85C
Working humidity :0% ~ 95%
The product weight :1kg
The wind resistance :80 m/s
The material Main body: Aluminum alloy
Chimney: PC
Installation dimension drawing:
Installation and use method:
● Lamps must be installed in a place where sunlight can be fully received to ensure that it can work continuously.
● Install the lamp on the horizontal mounting surface, the mounting surface should be flat and have sufficient mechanical strength, fixed with 4 M10 screws.
● When in use, turn on the battery switch at the bottom of the lamp, and turn it off for long-term storage.
● Set the required working mode, bottom wave switch, constant light/flash.
● The lamp has light control function, when the ambient illumination is lower than the light control switch value when the lamp starts to work.
● Because the lamp with photoelectric switch function, when the environmental light is high, the aviation light will not be lit. During the test, the aerial lamp should be placed in a dark environment.
Matters needing attention
● Internal storage battery, please replace the battery regularly to ensure that the lamp can work normally, it is recommended to replace once a year.
● When stored for more than 6 months, the product should be exposed to sunlight for 3 days to fully charge the battery.
● The top bird tip is sharp, beware of being pricked.
