Best price of electric arc furnace graphite electrodes
Product Description
Graphite Electrodes are a high-temperature resistant graphite conductive refractory material used in the metallurgical industry. Graphite Electrodes are made of petroleum bck, bituminous bck as aggregates, coal tar pitch as binders, after raw material calcination, crushing and milling, batching, kneading, molding, roasting, impregnation, graphitization, and machining, which are also known as artificial graphite electrodes in order to distinguish from natural graphite electrodes made of natural graphite.
Details:
Cautions:
> Be careful when transporting and pilling electrodes with a forklift and avoid a collision. One layer of goods at a time; notice the balance and alignment and avoid falling or breakage.
> When loading and unloading with a forklift, wire rope must be used and steel wrapping tape cannot be employed directly to fetch electrodes.
> Electrode should be stored in a clean and dry place. When pilling up outdoors, it should be covered with rain-proof tarpaulin and the number of piling layers ought not to exceed four.
> When using electrodes, special tools should be employed to cut the steel wrapping tape, and crane should not be adopted to avoid bursting.
> Steel-wire ball, metallic brush, or emery cloth is not allowed for cleaning the electrode thread, but compressed air free of oil and water is available.
> Use revolved resilient hanger and put a soft truss pad under the electrode joint to avoid breakage of the thread.
> Lift the electrode to the furnace by using a hoister with resilient hangers, and find out the center and move slowly downwards, screw and tighten with a hoop.
> If the two poles of the two electrodes are untouched or touched in overpressure, this may cause a bad effect.
> In order to avoid electrode breakage put the large materials in the lower part and small materials in the upper part.
Product Parameters
UHP Graphite Electrodes
| Project | Diameter(mm) | ||||||
| 300-400 | 450-500 | 550-650 | |||||
| YB | FC | YB | FC | YB | FC | ||
| Resistivity (μΩm)≤ | Electrode | 6.2 | 5.5 | 6.3 | 5.5 | 6.0 | 5.5 |
| Nipple | 5.3 | 3.8 | 5.3 | 3.8 | 4.5 | 3.8 | |
| Bending Strength(Mpa)≥ | Electrode | 10.5 | 12.0 | 10.5 | 12.0 | 10.0 | 12.0 |
| Nipple | 20.0 | 22.0 | 20.0 | 22.0 | 22.0 | 24.0 | |
| Elastic Modulus (Gpa)≤ | Electrode | 14.0 | 8.0 | 14.0 | 8.0 | 14.0 | 8.0 |
| Nipple | 20.0 | 17.0 | 20.0 | 17.0 | 22.0 | 17.0 | |
| Bulk Density (g/cm³)≥ | Electrode | 1.67 | 1.69 | 1.66 | 1.69 | 1.66 | 1.69 |
| Nipple | 1.74 | 1.80 | 1.75 | 1.80 | 1.78 | 1.80 | |
| C.T.E(*10-6/ºC) ≥room temperature~600ºC | Electrode | 1.5 | 1.4 | 1.5 | 1.4 | 1.5 | 1.4 |
| Nipple | 1.4 | 1.2 | 1.4 | 1.2 | 1.3 | 1.2 | |
| Ash(%)≤ | Electrode | 0.5 | 0.3 | 0.5 | 0.3 | 0.5 | 0.3 |
| Nipple | 0.5 | 0.2 | 0.5 | 0.2 | 0.5 | 0.3 | |
Allow Capacitance Flow of the electrode
| Nominal Diameter | Allowable capacitance flow(A) | Electrice current density | |
| Milimeter | Inch | ||
| 300 | 12'' | 15000-22000 | 20-30 |
| 350 | 14'' | 20000-30000 | 20-30 |
| 400 | 16'' | 25000-40000 | 19-30 |
| 450 | 18'' | 32000-45000 | 19-27 |
| 500 | 20'' | 38000-55000 | 18-27 |
| 550 | 22'' | 45000-65000 | 18-27 |
| 600 | 24'' | 50000-75000 | 18-26 |
| 650 | 26'' | 60000-85000 | 18-25 |
| 700 | 28'' | 70000-120000 | 18-30 |
Packaging & Shipping
our graphite electrode package:
normally our package is neutral standard export wooden support with twining plastic bags , to protect the all goods always are perfect when arriving clients' warehouse, no damage and no dirty during shipment .
FAQ
Q: What information should I let you know if i want to get a quotation?
A: The required material dimension (diameter*length; if possible, please kindly supply us drawings). graphite electrode uhp 600
If it is possible, please also provide the application of products, we will recommend the most suitable products with details for confirmation.
Q: How can you control your quality?
A: For each production processing, We have a complete QC system for the chemical composition and physical properties. After production, all the goods will be tested, and the quality certificate will be shipped along with goods.
Q: What is your lead time?
A: It usually needs about 15- 20 days after receiving the PO.
Q: What are your payment terms?
A: We can accept a 30% deposit, 70% balance to be against the BL copy or by LC, or other payment terms. (according to your order value)
Q: Can we visit your company?
A: Yes, for sure, It's my pleasure to visit Our company.
Q: What is the shipping cost? graphite electrodes eaf
A: The shipping cost is determined by the destination port, weight, packing size, total CBM of the products, we will try best to get the most reasonable shipping cost from the forwarders or express couriers to help you save more money.
