Application of XY-1 small water well drilling rig
XY-1 small drill rig widely used in drilling family wells, drilling industry wells and drilling survey geological sampling, SPT service etc. Drilling dia. will from 50-200mm or large, according to clients requirement, it can drill max. 100m deep. Different layer condition will need different bits, soil or soft layer will need clay bit, or ally bit, drag bit, for hard rock will need diamond bit, tricone bit etc.
Specifications of XY-1 small water well drilling rig
Drilling depth | 100m | ||
Drill rod dia. | 42mm | ||
Initial hole dia. | 110mm | ||
Final hole dia. | 75mm | ||
Angle range | 90°-75° | ||
Dimensions(L×W×H) | 1640×1030×1440 (mm) | ||
Weight(without power unit) | 500kg | ||
Swivel Head | |||
Spindle speed(3-speed) | 142/285/570 r/min | ||
Spindle stroke | 450mm | ||
upward displacement speed of idling vertical spindle | 0.05m/s | ||
Downward displacement speed of idling vertical spindle | 0.067m/s | ||
Spindle pull-down max | 15KN | ||
Spindle lifting capacity max | 25KN | ||
Hoist | |||
Max .lifting capacity(1-speed,single rope) | 10KN | ||
Cable volume (number) of hoisting drum | 27m | ||
Wire rope dia. | 9.3mm | ||
Mud Pump | |||
Model | Horizontal reciprocating single-acting piston pump | ||
Displacement max | |||
Equipped with diesel engine | 95L/min | ||
Equipped with motor | 77L/mm | ||
Allowable working pressure max | 1.2Mpa | ||
Continuous working pressure | 0.7Mpa | ||
Suction pipe dia | 32mm | ||
Discharge pipe dia | 25mm | ||
Main Features:
1. Very powerful at soil, sand, hard rock, etc. land condition.
2. Three kinds drill bits (three-wing bit, alloy bit and diamond bit) available for your choice, which can drill
both soft and hard ground, especially diamond drill bit effective in drilling hard rocks.
3. Hydraulic control system for greatly improving the working efficiency, saving labor force.
4. Mounted wheel or trailer, can be hauled easily by car or tractor, convenient to transport.
5. Power can be diesel engine or electric motor, as per your request.
Tips to select a right drilling rig:
1. What kind of projects you will work for?
Water well, Borehole, Exploration coring, Foundation Piling, Blast holes, Geothermal heat project or others?
2. Max drilling depth you want.
100m, 150m, 200m, 300m, or other depth.
3. The Min and Max borehole diameter you need.
Like Max 200mm, Min 75mm.
4. Geological condition of the working site if you know about it.
Soft ground like soil, mud, sand
Hard ground like hard rocks
Or mixed
