JOEO Laboratory simulated salt spray can be divided into three categories:
(1)Neutral salt chamber test,
(2) Acetate salt spray test,
(3)Copper salt accelerated acetate salt spray test
(1) The neutral salt spray test (NSS test) is the earliest and most widely used accelerated corrosion test method. It uses 5% sodium chloride salt water solution, and the PH value of the solution is adjusted to a neutral range (6.5 ~ 7.2) as a spray solution. The test temperature is 35℃, and the sedimentation rate of salt spray is required to be 1～2mL/80cm/h.
(2) Acetic acsalt spray test (ASS test) is developed on the basis of neutral salt spray test. It is to add some glacial acetic to the 5% sodium chloride solution, the pH value of the solution is reduced to about 3, the solution becomes and the salt mist formed finally becomes from neutral salt mist. Its corrosion rate is about 3 times faster than the NSS test.
(3) The copper salt accelerated acetate spray test (CASS test) is a rapid salt spray corrosion test recently developed. The test temperature is 50℃. A small amount of copper salt-copper chloride is added to the salt solution to strongly induce corrosion. Its corrosion rate is about 8 times that of the NSS test.
(1) The neutral salt spray test (NSS test) is the earliest and most widely used accelerated corrosion test method. It uses 5% sodium chloride salt water solution, and the PH value of the solution is adjusted to a neutral range (6.5 ~ 7.2) as a spray solution. The test temperature is 35℃, and the sedimentation rate of salt spray is required to be 1～2mL/80cm/h.
(2) Acetic salt spray test (ASS test) is developed on the basis of neutral salt spray test. It is to add some glacial acetic to the 5% sodium chloride solution, the pH value of the solution is reduced to about 3, the solution becomes and the salt mist formed finally becomes from neutral salt mist. Its corrosion rate is about 3 times faster than the NSS test.
(3) The copper salt accelerated acetate spray test (CASS test) is a rapid salt spray corrosion test recently developed. The test temperature is 50℃. A small amount of copper salt-copper chloride is added to the salt solution to strongly induce corrosion. Its corrosion rate is about 8 times that of the NSS test.
Cooperation Customers Reference
JOEO salt spray chamber, salt spray tester testing products are standard in every major automobile manufacturer in North America. We are the leader in salt corrosion testing innovation and working with companies like the Daimler Group, Ford, GM, Honda, Hyundai, Nissan, and Toyota. JOEO Salt spray chamber service customers included many auto related suppliers such as Delphi, Visteon, Siemens, Valeo, Magni, Henkel, Borg Warner etc.
Structure
JOEO salt fog test chamber,salt spray test equipment,cass test chamber,salt spray corrosion tester,salt fog chambers are very popular by our customers
Salt mist test chamber adopts 5mm or 8mm imported gray and white impact resistant P.V.C board, with high temperature resistance up to 85℃ and corrosion resistance.
Support frame: ¢ 10MM fiberglass rod, corrosion resistant. The steel V-frame and the fiber rod angle are placed to ensure the specimen is inclined at 15-30 degrees.
Pressure barrel is welded seamlessly with 2.0mm SUS304 stainless steel plate .If you need more models about our test equipment, please reference our chamber-testing(.)com
Fields Testing Standards
GB/T 20854-2007 Dry and wet salt spray test
ISO14993-2001 Dry and wet salt spray test
GB/T 2423.17-1993 salt spray test
GB/T 2423.18-2000 salt spray test
GB/T 10125-1997 salt spray test
ASTM.B117-97 salt spray test
JIS H8502 salt spray test
IEC68-2-11 salt spray test
IEC68-2-52 1996 salt spray test
GB.10587-89 salt spray test
CNS.4158 salt spray test
CNS.4159 CASS Copper accelerated salt spray test
GB/T 12967.3-91 CASS Copper accelerated salt spray test
