.jpg)
CO2 laser is the "gold standard"for laser resurfacing .It's effect has been approved more than 20 years ago .Bese on the theory of"Fractional Photothermolsis",Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth, and density that are surrounded by a reservoir of spared epidermal and dermal tissue,the normal skin been left between the injury point. allowing for rapid repair of laser-induced thermal injury. This unique modality, if implemented with high repetition Ultra Pulse Laser systems, enables high-energy treatments while minimizing risks,it is less pain,less down time and good effect.
JZ-2 CO2 Ultra Pulase Fractional Laser system is basd on the Ultra Pulse Laser system,it has one fractional scanner with the scanning area:1mm*1mm-15mm*15mm,one cutting head with focal length F=50mm.It can been used for the laser resurfacing efficiently with the high speed scanner,also it can been used for the precise laser surgery ,like eyebag removal,.eyelid.
Specifications:
Laser Type | Carbon Dioxide Laser |
Wavelength | 10.6μm |
Output Power: | 30W |
Work Mode | CW,Pulse,Ultra Pulse,Fractional |
Starting Voltage: | ≤25kV |
Operating Voltage: | ≤15kV |
Operating Current: | ≤25mA |
Focal length of working head | F=50mm |
Indication Beam: | Diode Laser532nm, 5mW |
Transmission System: | 7-Articulation Joint Spring Arm |
Smoke Exhausting System | Built-in air blow |
Cooling System | Water cooling |
Continuos: power | 1~30W step adjustable each 1 W |
Pulse:power | 1~30W step adjustable each 1W Interval time: 1~999ms |
Ultra pulse | power 1~30W step adjustable each 1W modulated frequency of 1000 Hz |
Pulse Duration | 90-1000μs |
Environmental temperature | 5-40C |
Power Supply | AC220V50Hz |
Relative Humidity: | ≤80% |
Scanner Parameters
Scan Type | Ellipse, Rectangular, Spot (multiple sizes), Triangular 11 type optional |
Scanning Area | 1mm*1mm-15mm*15mm |
Repeat Delay | 0.1s---- 5.0s. |
Micro Pulse Energy | 5mJ---50mJ. |
Treatment Level | 0.30%-----25.0% . |
Estimated Power | 24mJ----981J |
Ellipes Estimated Power | 31mJ----1000J |
Rectangular estimated power: | 24mJ----981J |
Spot size | 350 Micro |
Dwell Time | From 0.2 ms to 2 ms |
Dots pitch | 0.2 mm to 1.0 mm. |
Handpiece Velocity: | 0.1-----9cm2/s |
Scanning Depth: | <1.8mm |
Applications:
Skin resurfacing (to improve texture)
Pigmented lesions: age spots / brown spots / sun spots
Wrinkles around the eyes
Acne scars
Surgical scars
Melasma (mask of pregnancy)
Actinic Keratoses
Specifications
Working Mode
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
