.jpg)
24 cores Wall Mount Fiber Optic Distribution Box
Overview:,That not only ensures the curvature radius of fiber but also protects the eyes from highlight.
Suitable for being installed in different kinds of racks or cabinets.
Side door and upside door could be opened to arrange the fiber.
Optical cables can be lead in/out from rightward or leftward.
The wiring connection device used in connecting optical cables and optical communication installations. Suitable for the protective connection between cables and pigtails.
Special fiber routing designs to ensure that the bending radii are over 40mm.
Main Technical Indexes:
Environmental temperature:-25℃~+55℃.
Relative humidity:<85%(When the temperature is below 30℃).
Atmospheric pressure:70~106KPa.
Insulation resistance:≥2×104MΩ/500VDC.
Voltage resistance strength:non-puncture, no arc-over under 3KVDC/1min.
Insertion loss: PC>40dB, UPC>50dB, APC>60dB.
Connection life span: >1,000 times.
Dimension:
24 fibers: 310*310*88.5 mm
48fibers: 360*310*131 mm
Fiber Management Tray also called ODF Distribution Box, Integrated Splicing and Distribution ODF.
It is mainly used for cable inlet, grounding and fixing and the splicing between the terminal end and pigtail. Users can select unit or ring flange amount according to their practical needs
Features of the structure:
The body with electrostatic spraying surface, light structure and good-looking appearance.
19" or 23'' standard installation, adjustable in forward and backward directions.
The panels can be clamped with 12/24/48 cores FC/SC/ST adaptors, which bevel the face side with 30 degrees
Overview:,That not only ensures the curvature radius of fiber but also protects the eyes from highlight.
Suitable for being installed in different kinds of racks or cabinets.
Side door and upside door could be opened to arrange the fiber.
Optical cables can be lead in/out from rightward or leftward.
The wiring connection device used in connecting optical cables and optical communication installations. Suitable for the protective connection between cables and pigtails.
Special fiber routing designs to ensure that the bending radii are over 40mm.
Main Technical Indexes:
Environmental temperature:-25℃~+55℃.
Relative humidity:<85%(When the temperature is below 30℃).
Atmospheric pressure:70~106KPa.
Insulation resistance:≥2×104MΩ/500VDC.
Voltage resistance strength:non-puncture, no arc-over under 3KVDC/1min.
Insertion loss: PC>40dB, UPC>50dB, APC>60dB.
Connection life span: >1,000 times.
Dimension:
24 fibers: 310*310*88.5 mm
48fibers: 360*310*131 mm
Fiber Management Tray also called ODF Distribution Box, Integrated Splicing and Distribution ODF.
It is mainly used for cable inlet, grounding and fixing and the splicing between the terminal end and pigtail. Users can select unit or ring flange amount according to their practical needs
Features of the structure:
The body with electrostatic spraying surface, light structure and good-looking appearance.
19" or 23'' standard installation, adjustable in forward and backward directions.
The panels can be clamped with 12/24/48 cores FC/SC/ST adaptors, which bevel the face side with 30 degrees
.jpg)
