Wire Mesh Structured Packing are constructed of innovative textured wire gauze layers. This special gauze (which is normally made of stainless steel) provides a high degree of wicking action, drawing the liquid in all directions into a thin film and provides a marked improvement in uniform wetting of the packing bed.The wire gauze layers are corrugated in a novel contoured pattern and arranged vertically, in close contact, to form modules. These modules are then stacked with an alternating 90 degrees orientation of every other layer which gives a good lateral distribution of liquid and gas.ApplicationBecause of their low pressure drop and minimum hold-up characteristics, EVERPACK is an ideal mass transfer media for temperature-sensitive systems.These include:- Vacuum distillation, temperature sensitive compounds, low-liquid loading systems, specialty chemicals, isomer separation, essential oils and fragrances, organic intermediates, amines, glycols, fatty acids, fatty alcohols, plastic monomers, vitamins and pharmaceuticals.
Mesh structured is an important milestone in the development, such as corrugated packing by the pressure of the screen from film arranged, corrugated chip angle of 30 degrees or 50 degrees, adjacent the opposite direction the two corrugated films, filling in the tower, the next two 90-degree staggered stacked packing. With high efficiency, lower pressure drop and the flux of the advantages of large, products are AX, BX, CY type, commonly used in the difficult matter of separation and heat-sensitive vacuum distillation, atmospheric distillation and absorption process.
