One, shaped like modeling clay, when the perforated metal pipes and containers can leak, with this product can directly plug in the leak when the leak hole on the block, you can also play a strengthening bond in the role of the weak parts, plugging reinforcement quality goods.
Second, this product is mainly used in various types of metal corrosion perforation and run, run, drip, leak cold welding stick up. Can also quickly making sample or can not find the parts, reinforcement has corroded or worn parts, used very widely.
Third, a special two-part form with the core of the clay-like, combining direct hand use, use without dropping no flow, control is as simple as playing a rubber cement, cured gel may be cutting, polishing, spraying, The remaining part of the long term preservation. To ensure the gel has a good affinity with the objects, with the same or similar weight, density, expansion coefficient to ensure a durable and reliable bond.
Second, this product is mainly used in various types of metal corrosion perforation and run, run, drip, leak cold welding stick up. Can also quickly making sample or can not find the parts, reinforcement has corroded or worn parts, used very widely.
Third, a special two-part form with the core of the clay-like, combining direct hand use, use without dropping no flow, control is as simple as playing a rubber cement, cured gel may be cutting, polishing, spraying, The remaining part of the long term preservation. To ensure the gel has a good affinity with the objects, with the same or similar weight, density, expansion coefficient to ensure a durable and reliable bond.
Four basic parameters: http://www.dulou.cn/z/111.doc
5, Use: leaks leaking a knife to cut a small piece of hand kneading and press the leak point, other people all over with sandpaper after the spray with a spray cleaner clean, dry and then cut a small piece of kneading by hand after the bonding office in the last around. If the leaks for the hole, you can start with a first hole blocking cone after cone, to implement the above steps, a few minutes after GB120 repeated smear leaks in and around several times above that completed. Such as adhesive glue off medium leakage need to use the rapid bonding adhesive can be used GB1400 instantaneous point drop in the leakage around the bonding time of 40 seconds.
