Integral Flanged End Valve Design Construction and Specifications
conform to API 602,and ANSI B16.34.
Each are tested according to API 598,and marking is per MSS SP-25.
conform to API 602,and ANSI B16.34.
Each are tested according to API 598,and marking is per MSS SP-25.
Construction is as follows:
1>Full Port and Conventional Port
2> Face to face according t ANSI B16.10
3> Flanges according to ANSI B16.5
4> Pressure seal bonnet
5> Outside Screw and Yoke (OS & Y)
6> Two piece self-aligning packing gland
7> Integral backseat
8> Integral body flanges
9> Butt Welded Ends to ASME B16.25
10> RTJ bonnet gasket ring joint type
11> Bolted bonnet with spiral wound gasket,threaded and
seal welded bonnet or threaded and pressure seal bonnet
2> Face to face according t ANSI B16.10
3> Flanges according to ANSI B16.5
4> Pressure seal bonnet
5> Outside Screw and Yoke (OS & Y)
6> Two piece self-aligning packing gland
7> Integral backseat
8> Integral body flanges
9> Butt Welded Ends to ASME B16.25
10> RTJ bonnet gasket ring joint type
11> Bolted bonnet with spiral wound gasket,threaded and
seal welded bonnet or threaded and pressure seal bonnet
.jpg)
