There are two eccentric shafts rotating at high speed at the same time from opposite directions, thus the strong centrifugal force is formed. The component forces of centrifugal force along the vibrating direction will always overlap each other, then counteract with that of vertical force from vibrating direction, then exciting force along single direction is formed to drive the feeder vibrate along straight line. When materials are fed into the feeder, they may be thrown up and move like Para curve, then fall down. The materials will move forward on the slope surface of the feeder.
Characteristics of Vibratory Feeder:
Smooth vibration,
Reliable operation,
Long service life,
Low noise,
Low power consumption,
Easy to adjust,
Easy to install,
Light weight,
Small volume,
Simple maintenance.
Model: GZD Series, ZSW Series
Technical Parameter of Vibrating Feeder:
Model | Max Feeding Size (mm) | Capacity (t/h) | Speed of Eccentric shaft (r/min) | Model of Motor | Power (kw) | Motor Speed (r/min) | No. of Motor | Install-ation Angle | Overall Dimensions (mm)(L×W×H) |
GZD-180×80 | 300 | 30-80 | --- | YZO-20-6 | 2×1.5 | 970 | 2 | 0-10 | 2200×1100×800 |
GZD-300×90 | 500 | 40-100 | --- | YZO-30-6 | 2×2.2 | 970 | 2 | 0-10 | 3050×1430×1550 |
GZD-370×100 | 700 | 150-300 | --- | YZO-30-6 | 2×3.2 | 970 | 2 | 0-10 | 4250×1874×1130 |
GZD-430×120 | 800 | 200-400 | --- | YZO-30-6 | 2×5.5 | 970 | 2 | 0-10 | 4955×2206×1120 |
ZSW-380×96 | 500 | 90-100 | 500-714 | Y180L-8 | 11 | 750 | 1 | 0 | 3882×2224×2121 |
ZSW-420×110 | 580 | 200-430 | 500-800 | Y180L-6 | 15 | 970 | 1 | 0 | 4400×2050×1660 |
ZSW-490×96 | 500 | 120-240 | 500-800 | Y180L-6 | 15 | 970 | 1 | 0 | 4957×2277×2150 |
ZSW-490×110 | 580 | 120-280 | 500-800 | Y180L-6 | 15 | 970 | 1 | 0 | 4957×2400×2150 |
ZSW-490×130 | 720 | 200-320 | 500-800 | Y180L-6 | 22 | 970 | 1 | 0 | 4957×2580×1870 |
ZSW-590×110 | 600 | 350 | 750 | Y180L-6 | 22 | 970 | 1 | 0 | 6000×2500×2150 |
ZSW-600×130 | 750 | 400-560 | 500-800 | Y180L-6 | 30 | 970 | 1 | 0 | 6082×2580×2083 |
.jpg)
.jpg)
