The instrument is mainly used for inspecting the radial bound, circular bound and end surface circular bound of the axial or disk parts. The product is novel and good-looking in design, and its accuracy is high while it is very convenient in use.
Main technique parameters:
1\ The radial circular bound of the Morse No.2 finial 60°cone surface to the Morse cone≤0.005mm;
2\ The parallelism between the finial axle within the scope of 100mm and the leading track (parallel and vertical direction)≤0.004mm;
3\ The max diameter of the tested part is 270mm;
4\ Measuring length 300mm\500mm\1000mm\1500mm.
2\ The parallelism between the finial axle within the scope of 100mm and the leading track (parallel and vertical direction)≤0.004mm;
3\ The max diameter of the tested part is 270mm;
4\ Measuring length 300mm\500mm\1000mm\1500mm.
| Type (mm) | Center Height (mm) | Measuring diamete (mm) | Precision | |
| Horizontal (μm) | Vertica (μm) | |||
| 200 | 100 | 200 | ≤ 8 | ≤ 5 |
| 300 | 100 | 200 | ≤ 8 | ≤ 5 |
| 300 | 170 | 340 | ≤ 8 | ≤ 5 |
| 300 | 300 | 600 | ≤ 8 | ≤ 5 |
| 500 | 170 | 340 | ≤ 8 | ≤ 5 |
| 500 | 250 | 500 | ≤ 8 | ≤ 5 |
| 500 | 300 | 600 | ≤ 8 | ≤ 5 |
