LD PUMPED ALL-SOLID-STATE UV LASER
All solid state 266 nm UV laser is made features of ultra compact, long lifetime, low cost and easy operating,which is widely used in UV curing,micro-electronics, CD carving, laser medical treatment, scientific experiment,etc.(266/0.1~5uJ/1~30mW)
|
Wavelength (nm)
|
266±1
|
|
|
Output average power (mW)
|
1~50
|
|
|
Transverse mode
|
Near TEM00
|
|
|
Operating mode
|
Frequency conversion of Q-switched pulsed laser
|
|
|
Single pulse energy (μJ)
|
0.1~5
|
|
|
Pulse duration (ns)
|
~7
|
|
|
Rep. rate (kHz)
|
Controllable
|
Fixed rep. rate, such as 1k, 2k, 3k, 4k, 5kHz, with stable laser pulses emitting (stable pulse energy, peak, duration and period).
|
|
Different rep. rate in the range of 1kHz-5kHz can be obtained by input an external TTL signal.
|
||
|
Uncontrollable
|
Undefined rep. rate among 5k-7kHz and unstable laser pulse emitting. Suitable for the applications only needing high peak power pulses.
|
|
|
Average power (mW)
|
Average power (mW) = Single pulse energy (μJ) * Rep. rate (kHz)
|
|
|
Ave power stability (over 4 hours)
|
<5%, <10%
|
|
|
Warm-up time (minutes)
|
<10
|
|
|
M2 factor
|
<1. 5
|
|
|
Beam parameters
|
Elliptical (4:1), Beam spot ~2mm
|
|
|
Polarization ratio
|
>100:1
|
|
|
Beam height from base plate (mm)
|
45
|
|
|
Operating temperature (℃)
|
10~35
|
|
|
Power supply (90-264VAC)
|
PSU-H-FDA
|
|
|
Expected lifetime (hours)
|
10000
|
|
|
Warranty period
|
1 year
|
|
|
Remarks
|
Please Note: because of the Walk-off effect of Nonlinear crystals, the beam quality of UV laser is not so good as that of 1064/532nm laser.
|
|
