3D wire panels machine
The automatic production line of 3Dimensional,adopt PLC control system with touch screen,by pneumatic and stepping motor power,via auto oblique joint and cut off,the strict fixing of flat mesh and foam panel,the combined welding of oblique cutting wire and flat mesh,to finish the produce of iron wire mesh frame polystyrene sandwich panel. It has following character:automation production,high productivity,loss welding rate,large strength of welding point,welding uniformity,good surface,and the production cost is very low.
The main parameter:
Rated electrical power | 75KVA | ||
Input voltage | AV380V 50HZ | ||
Air source allocation | 3 Cubic meter/MIN 0.6MPa | ||
Applicable range | Core panel thickness | 30mm-100mm | |
Truss wire configuration | Single or double sided mesh ,different densities of truss wires | ||
production standard | Standard Sandwich panel | Llength | 3000mm |
Width | 1220mm | ||
Nonstandard sandwich panel | The length according to your requirement ≤4500mm | ||
material characteristic | Welded wire material | 1.5mm-2.5mm cold-drawing low-carbon steel wire | |
Core panel material | EPS board & XPS board | ||
Gridding space of mesh | 50mm*52mm | ||
product efficiency | seeing the attached table | ||
Lack welding rate | ≤5% | ||
Welding strength | (single point)≥330N | ||
Overall dimension | Length | 13500mm | |
Width | 1800mm | ||
Height | 1700mm | ||
Weight | 4000kg | ||
The finished products
Output speed :
Based on a 300 working days per year, each with 8 hours and assumed efficiency factor of 60 % (depending on local conditions), this results in a max. net output of pprox.300.000 m2 per year and per one working shift on a thuss step of 200 mm and in a max. net output of approx. 220.000 m2 per year and per one working shift on a truss step of 100 mm. Hard drawn wire for cover mesh and for splice mesh:3 mm diameter, minimum yield strengsth of 500 to 550 N/mm2, maximum carbon contend 0.15 %, clean wiresurface, no rust, rease, oil, paint or drawing compounds to insure smooth flow of the welding current. Galvanized wire for spacer (truss) wires:3.8 mm diameter, minimum yield strenth of 700 N/mm2, maximum carbon content 0.15 %, clean wire surface and uniform zinc coating.
