0.2-1A 0.2-1A 0.6-5A
0.2-1A 0.2-1A 0.6-4A 0.2-1A 0.2-1A 0.6-4A 0.2-1.2A 0.2-1.2A
Wave and noise(Note: 3) 100mV 100mV 100mV 100mV 100mV 100mV 100mV 100mV 100mV 100mV 100mV 100mV
Inlet stability(Note: 4) ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 1%
Load stablity (Note: 5) ± 1% ± 4% ± 4% ± 1% ± 4% ± 4% ± 1% ± 4% ± 4% ± 1% ± 5% ± 5%
DC output power 52W 49W 50W 51W
Efficiency 66% 69% 71% 72%
Adjustable range for DC voltage CH1; +10, -5% CH1: +10, -5% CH1: +10, -5% CH1: +10, -5%
AC input voltage range 85-132VAC/170-264VAC 47-63Hz, 240-370VDC
Input current 1.6A/115V 0.8A/230A
AC INnrush current Cold-start current 20A/115V 40A/230V
0.2-1A 0.2-1A 0.6-4A 0.2-1A 0.2-1A 0.6-4A 0.2-1.2A 0.2-1.2A
Wave and noise(Note: 3) 100mV 100mV 100mV 100mV 100mV 100mV 100mV 100mV 100mV 100mV 100mV 100mV
Inlet stability(Note: 4) ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 1%
Load stablity (Note: 5) ± 1% ± 4% ± 4% ± 1% ± 4% ± 4% ± 1% ± 4% ± 4% ± 1% ± 5% ± 5%
DC output power 52W 49W 50W 51W
Efficiency 66% 69% 71% 72%
Adjustable range for DC voltage CH1; +10, -5% CH1: +10, -5% CH1: +10, -5% CH1: +10, -5%
AC input voltage range 85-132VAC/170-264VAC 47-63Hz, 240-370VDC
Input current 1.6A/115V 0.8A/230A
AC INnrush current Cold-start current 20A/115V 40A/230V
Leakage current <0.5mA/240VAC
Overload proctection 105%-150%Type: Foldback: Current limiting reset: Auto recovery
Over-voltage protection ^^^^
High-temperature protection ^^^^
Temperature coefficient ± 0.03%/C(0-50C)ON+5V
Setup rise hold up time 200ms, 50ms, 16ms
Vibration 10-500Hz, 2G 10min, /1cycle, Period for60min, Each axes
Withstand voltage Input and output internal: 1.5KVAC, Input and enclosure: 1.5KVAC, Output and enclosure: 0.5KVAC
Isolation resistance Input and output internal: Input and enclosure, Output and enclosure: 500VDC/100MΩ
Working temperature and humidity -10C~+60C(Refer to output derating curve), 20%~90%RH
Store temperature and humidity -20C~+85C, 10%~95%RH
Overall dimension 195× 97× 38mm
Weight 0.54Kgs
Safety standards Meet UL 1012 requirement(Not apply for the mark)
EMC standards ^^^^
Note:
1. The testing condition for the paramenter above is: 230VAC input, rated load, 2570% RH. Humidity.
2. Error. Include the setting error, line stability and load stability. (Note: 5).
3. Wave test: Adopting "A12"double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting.
4. Inlet voltage stability test: When is over load, the lowest voltage of inlet is up to the highest voltage.
5. Load stability test: The load is from 0% to 100%.
6. Total output canbe maximum Current, total load can not exceed the maximum output power
Overload proctection 105%-150%Type: Foldback: Current limiting reset: Auto recovery
Over-voltage protection ^^^^
High-temperature protection ^^^^
Temperature coefficient ± 0.03%/C(0-50C)ON+5V
Setup rise hold up time 200ms, 50ms, 16ms
Vibration 10-500Hz, 2G 10min, /1cycle, Period for60min, Each axes
Withstand voltage Input and output internal: 1.5KVAC, Input and enclosure: 1.5KVAC, Output and enclosure: 0.5KVAC
Isolation resistance Input and output internal: Input and enclosure, Output and enclosure: 500VDC/100MΩ
Working temperature and humidity -10C~+60C(Refer to output derating curve), 20%~90%RH
Store temperature and humidity -20C~+85C, 10%~95%RH
Overall dimension 195× 97× 38mm
Weight 0.54Kgs
Safety standards Meet UL 1012 requirement(Not apply for the mark)
EMC standards ^^^^
Note:
1. The testing condition for the paramenter above is: 230VAC input, rated load, 2570% RH. Humidity.
2. Error. Include the setting error, line stability and load stability. (Note: 5).
3. Wave test: Adopting "A12"double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting.
4. Inlet voltage stability test: When is over load, the lowest voltage of inlet is up to the highest voltage.
5. Load stability test: The load is from 0% to 100%.
6. Total output canbe maximum Current, total load can not exceed the maximum output power
.jpg)
