Introduction:
SVP10BF Optical Transceiver is a kind of optic Ethernet equipment, interconnects with Fiber Media Converter, output 1 channel E1 (support HDLC protocol), to achieve the perfect interconnection between E1 and Media Converter. SVP configure flexibly, maintain easily, and provide comprehensive network management function.
Main Feature:
E1Loop-back Isolation: When there is E1 link loop-back, the device can automatically detect and isolate this loop-back E1, and give alarm instruction. The isolation can effectively avoid the whole link blocking caused by Broadcast Storm. After loop-back being straight, E1 can automatically return to service. It is a unique function, which can effectively avoid service break caused by careless loop-back E1 during the project and operation maintenance.
Strong Power Supply Adaptation: The device working voltage range is wide (not less than nominal voltage ±20%), adopting appropriate lighting protection, adapt to power supply in remote rural areas.
Interface Surge Protection: Both E1 and Ethernet RJ45 interface adopt advanced SPD device, can effectively reduce the rate of communication interface breaking caused by power supply fluctuation and lighting induction.
Network Management Function: The device supports local/remote network management, remote terminal alarm function.
Perfect interconnection between Optic Interface and Media Converter.
Support HDLC protocol: Can interconnect with all the HDLC protocol manufactures.
Technical Parameter
E1 Interface Electronic Specification
Nominal Speed Rate: 2048Kbps, Tolerance ±50ppm
Code Type: HDB3
Interface Impedance: 75Ω (unbalanced)
Digital Interface Electrical Specification: Comply with ITU-TG.703 propose.
Input Jitter, Jitter Tolerance, and Jitter Transform Performance: Comply with ITU-TG.823 propose
Level: ±2.37V±10% or ±3.00V±10%
Interface Connector is: BNC Coaxial Mount
10/100Base-Tx Interface Index
Provide 4* RJ45 electronic interface, support local switching;
Comply with IEEE802.3 10Base-T, IEEE802.3u 100Base-TX and 100Base-FX;
Support IEEE-802.3D Spanning Tree, IEEE802.1Q VLAN, IEEE802.1P CoS standard;
Support full duplex IEEE802.3X flow control, half duplex back pressure flow control;
Interface Speed Rate: 10/100Base-Tx, 10/100M auto-adaptation, support port speed rate limit (minimum 8K steps)
Support Broadcast Strom Suppression;
Support RJ45 interface direct connection/cross line auto-adaptation
Interface Lighting Protection
Power Secondary Lighting Protection
E1\RJ45 Interface SPD Prevent Surge
Management Interface
Connector: RS-232
Interface Level: RS-232 level
Interface Connector: RJ-45
Management Interface Baud Rate: 57600bit/s
Power Supply Condition
DC Voltage: +24VDC, Tolerance Range: +24V±15%, Power Supply Ripple: ≤120mVp-p
DC Voltage: -24VDC, Tolerance Range: -24V±15%, Power Supply Ripple: ≤120mVp-p
DC Voltage: ±24VDC, Tolerance Range: +24V±15%, -24V±15%, Power Supply Ripple: ≤120mVp-p
DC Voltage: -48VDC, Tolerance Range: -36V~72V, Power Supply Ripple: ≤240mVp-p
AC Voltage: 220VAC±20% 50HZ
Power Consumption: ≤ 10W
Working Environment
Power Supply Voltage: 170 VACS~ 270 VACS or -38 VDC ~ -72 VDC
Device Consumption: Desktop/Card Consumption ≤5W; Chassis device full load consumption ≤85W. Dual power supply redundant backup, power consumption 100W/piece.
Working Environment: 0℃~ 50℃, humidity 45%~95% no condensation,
No-corrosive and solvent air, no dust, no strong magnetic interference.
Dimension
1. 210mm*140mm*44.5mm, can be installed in standard 19" rack.
2. 483mm*280mm*44.5mm (19" chassis 1U)
