Product name: IP65 CREE LED Wall Pack with UL & DLC approval
Model: CNC-WP-01
LED Chips: CREE
Power supply: Meanwell
Approval: UL&CUL DLC Listed
Warranty: 5Years
----30W&60W IP65 CREE LED Wall Pack(UL&DLC)
----Physical sizes of 30W&60W CREE LED Wall Pack(UL&DLC)
----Physical sizes of 100W CREE LED Wall Pack(UL&DLC)
Specification:
Power | HPS/Metal Halide Replacement | Lumen | Certification |
30W-A | 100-200W | 2300-2500Lm | UL & CUL |
30W-B | 100-200W | 2400-2600Lm | UL & CUL+DLC |
60W-A | 200-300W | 4200-4500Lm | UL & CUL |
60W-B | 200-300W | 4500-4800Lm | UL & CUL+DLC |
100W-A | 400-500W | 6500-7000Lm | UL & CUL |
100W-B | 400-500W | 6700-7200Lm | UL & CUL+DLC |
Input Voltages:120-277Vac
CRI: >70Ra
IP Rating:IP65
Operating Temp: -30 ºC to +50 ºC
Operating Humidity: 20% to 90%RH
Power Fact(PF) :0.986
Power Supply Efficiency: > 90%
Color Temperature:3000K(+/-300K), 4000K(+/-300K),6000K (+/-300K)
IES test:
----Light Intensity Distributor Curve of 60W LED Wall Pack (UL&DLC)
----Light Intensity Distributor Curve of 100W LED Wall Pack (UL&DLC)
----Lux Measurement of 60W LED Wall Pack (UL&DLC)
----Lux Measurement of 100W LED Wall Pack (UL&DLC)
Installation:
1) Use a screwdriver to loosen the screws and open the fixture.
2) Take the back plate from the fixture and drill holes through casting over mounting holes to mount it to the wall/ceiling.
3) Connect the input and ground wires of the driver box to the main power outlet.
4) Connect the LED array to the output leads of driver.
5) Reattach the fixture front to the back plate. Tighten the housing screws to close the fixture.
Ordering Information
Item code | Watts | Initial lumens | Iine voltage supply | Color Temperature | Starling Temerature | Replace HID |
RL-WP-60W-A | 60W | 6000lm | 110-277Vac | 5500-6000K | -30 ºC | 150W-250W |
RL-WP-100W-A | 100W | 9500lm | 110-277Vac | 5500-6000K | -30 ºC | 300W-400W |
WARNING:
Disconnect supply power from the source prior to installation.This product must be installed by a
person familiar with the construction and operation of the product and the hazards involved,and in
accordance with current electrical codes and/or the current National Electric Code(NEC).Consult a local licensed electrician if you are not sure about the installation.To reduce potential of electric shock, fixture must be grounded.The electrical input voltage of this product is 120-277V AC.The installer must determine whether power supply is in the range of 120-277V Ac at the luminaire before installation.Do not mount or support these fixtures in a manner that can cut the outer jacket or damage the wire insulations.Do not restrict fixture ventilation.Do not cover fixtures with insulation or any material that will impede air flow.
----back view of IP65 CREE LED Wall Pack(UL&DLC)
----side view of 100W CREE LED Wall Pack(UL&DLC)
----front view of 100W CREE LED Wall Pack(UL&DLC)
