High mast pole light(specification)
1.HIGH MAST DIMENSION | ||||
1.1 MOUNTING HEIGHT | 25M | |||
1.2 CROSS SECTION SHAPE(NO OF SIDES) | 20 | |||
1.3 MAX TOTAL NO OF SECTIONS | 4 | |||
1.4 MAX SECTION LENGTH | 8M | |||
BOTTOM SECTION | INTERMEDIATE 1 | INTERMEDIATE 2 | TOP SECTION | |
LENGTH | 8M | 8M | 8M | 8M |
THICHNESS | 6MM | 5MM | 4MM | 4MM |
TOP AF | 187MM | |||
BOTTOM AF | 600M | |||
1.5 SERVICE DOOR DIMENSIONS | ||||
1.5.1 LENGTH | 1200MM | |||
1.5.2 WIDTH | 300MM | |||
1.5.3 DOOR BOTTOM FROM THE GROUND LEVEL | 600MM | |||
1.6 DOOR OPENING TO BE REINFORCED HEAVILY TO PREVENT BUCKLING | YES | |||
1.7 ANTI-VANDALISM DOOR LOCK | GALVAPOLE DESIGN | |||
1.8 BASE FLANCE | ||||
1.8.1 O.D | 900MM | |||
1.8.2 P.C.O | 780MM | |||
1.8.3 THICHNESS1 | 35MM | |||
2.DESIGN CONDITIONS | ||||
2.1 NUMBER LUMINAIRES | 20NOS | |||
2.2 LUMINAIRES RATING | 1000HPSV | |||
2.3 MAX PROJECTED LUMINAIRES SAIL AREA (BASED ON SYMMETRICAL LUM ARRANGEMENT) | 3.0M2 | |||
2.4 MAX LUMINAIRES AND BALLAST MASS | 500KGS | |||
2.5 BASIC WIND SPEED | 35M/S AT 10M HEIGHT | |||
2.6 DESIGN SAFTY FACTOR | 2.7 AT 35M/S | |||
3.CONFIRMING STANDARDS | ||||
3.1 MAST DESIGN | …. | |||
3.2 MATERIAL | Q235 SS400 | |||
3.3 WELDING | BS5135 | |||
3.4 GALVANIZING | BS729 | |||
4.TESTING PROCEDURE | DIMENSIONAL VERIFICATION | |||
GALVANIZING THICKNESS | ||||
MATERIAL THICKNESS | ||||
NOTES: THE LATCHING MECHANISM USES SELF LOCKING SYSTEM FULLY OPERATIONAL BY LAW OF GRAVITY AND MUST NOT CONTAIN MECHANICAL COMPONENT SUCH AS SPRING LEVER ETC
.jpg)
