Engine Oil Pan heater

Payment Terms: T/T,L/C
Trade on HiSupplier, Worry Free Guarantee
Trading safety, secure your money, lower the risk, protect both buyers and suppliers
HiSupplier is a Chinese multinational company in U.S, it helps to coordination and order landing.
More ›
  • Product Details
  • Company Profile
  • Product Reviews
Basic Info.
  • Brand Name: Honeywon 
  • Place of Origin: Guangdong  
  • Means of Transport: Air
Supply Capacity

Product  Features:
Silicone  covered  for  resistance  against  oil  and  acid  for  longer  life  
Fast  and  easy  to  install  
Extends  the  life  of  the  battery  
Wraps  around  battery  to  reduce  the  strain  on  cold-weather  starts  
Various  sizes  to  fit  most  batteries  
Wide  range  of  sizes  in  both  120  volt  and  240  volt  (optional)
Extends  the  life  of  the  battery  

Product  Specifications:
Product  Name:  Thermal  Reserve  Battery  Strip
Brand:    Honeywon
Size:  36inch  X  8inch  X  1.5mm  or  to  be  customized
Voltage:  120v  or  240v  or  to  be  customized
Wattage:  80w  or  to  be  customized  

Technical    Parameters:
1    )Maximum    temperature    resistance    of    insulator:300C
2    )Maximum    operation    temperature:    250C
3    )Insulation    Resistance:≥500    MΩ/DC    1000V
4    )Breakdown    Voltage:≥    AC1500v/5S
5    )Capacity    Tolerance:±5%
6    )Temperature  range:-60C~250C  for  continuous  heated,Heating  element:both  etched  foil  and  wire-wound  element  available.
7    )  Dimension:Maximum  1.2m  x  Xm,  Minimum:1.5mm  x  1.5mm,  standard  thickness:1.5mm  (thinnest:0.8mm,thickest:4.5mm),
Lead  wire  length:standard  130mm.

Product  Description
A  battery  can  lose  60%  of  its  starting  power  when  the  temperature  reaches  0-degrees  F.  Cold  engines  require  more  power  
from  the  battery  at  these  temperatures.  These  two  factors  make  it  imperative  that  you  use  a  battery  pad  heater  to  extend  
the  life  of  your  battery,  and  assist  in  your  cold  weather  starting  requirements.  Fully  charged  batteries  have  a  significant  
drop  in  power  at  colder  temperatures.  The  battery  wrap  allows  you  to  have  full  cranking  power  regardless  of  the  cold.  
The  battery  heater  should  not  be  used  when  the  temperature  is  above  freezing.  

Installation  Instructions:
1. Loosen  or  remove  battery,hold  down  bolts
2. Wash  off  sides  of  battery-wipe  dry
3. Wrap  blanket  around  battery,  pull  tight  at  corners,  and  tie  with  tapes  provided
4. Tighten  battery  hold-downs
5. Run  cord  to  front  grille,  taping  where  necessary.

Keep  printed  side  out.Do  not  overlap  and  energize  only  when  applied  to  battery.
Do  not  operate  when  outside  air  temperature  is  above  freezing  (32F/0C).

Send message to this supplier
Mr. Mark Zhang
Tel: 86-752-8481591
Enter between 20 to 3,000 chatacters.
Contact Method
Honeywon Heater Products Co.,Ltd
China (Mainland)
Didn't find what you're looking for? Post Buying Lead or contact our customer service specialist for help!
Buyer Help Center