70/30 Nickel Copper Alloy Wire have excellent resistance to bio-fouling and corrosion in sea-water with some variations in the performance of the alloys under different conditions.
The excellent corrosion resistance of 70/30 Nickel Copper Alloy Wire makes it the best choice in Marine situation applications. Some materials with apparently better corrosion resistance may have disadvantages such as lack of resistance to bio-fouling, lack of availability in the forms required, or susceptibility to crevice corrosion. They may also be more expensive and therefore less cost-effective over the required service lifetime.
Diameter: 0.05mm-10mm. 0.02Inch-0.3937 Inch
Chemical Composition ( %): of 70/30 Copper Nickel Alloy wire:
Chemical Composition ( %): of 70/30 Copper Nickel Alloy wire:
Alloy | Name | Copper | Nickel | Iron | Lead |
C70600 | 90-10 copper nickel | ~ 89 | 9.0 – 11.0 | 1.0 – 1.8 | < 0.05 |
C71500 | 70-30 copper nickel | ~ 69 | 29.0 – 33.0 | 0.4 – 1.0 | < 0.05 |
Typical Properties of 70/30 Copper Nickel Alloy wire:
Properties of some Cu-Ni alloys | |||||||
Alloy | Density g/cm3 | Thermal conductivity W/(m·K) | TEC µm/(m·K) | Electrical resisitivity µOhm·cm | Elastic modulus GPa | Yield strength MPa | Tensile strength MPa |
90-10 | 8.9 | 50 | 17 | 19 | 135 | 105 | 275 |
70-30 | 8.95 | 29 | 16 | 34 | 152 | 125 | 360 |
Typical Applications
· Desalination
· Underwater tubing
·Exchangers
·Marine hardware
Wire Further Processing | Cut to length Wire |
Flat Wire | |
Square and Shaped Wire | |
Rewinding and spooling | |
Polishing and cleaning |
Product Description: The product produced by us is of good quality and is priced reasonably.
Competitive price: The labour cost and cost on procuring the raw materials is low and hence the manufacturing cost is reasonable. We provide high facility in short producing cycle and have strong adaptive capacity in producing variation of products.
High quality assured: The work done by us has a good command of advanced technological process in the respect of smelting, rolling, drawing and heat treatment up to finished products. The chemical analysis department, the physical testing department and the quality control department all operate an all-round monitoring of our products from raw materials to final products.
Packing Process & Transportation:
Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.
Transportation: By air: Beijing International Airport OR By sea: Trianjin Seaport
We provide our customers with excellent services. If you want more detailed information of this product or related problems, please contact with us, we will reply as soon as possible (general in 24 hours).
