The program lets youto read out and clear fault codes, shows you live data, lets you toperform output test, and supports remote, and key programming.
The program supportsmany control units, like Engine, Automatic Transmission, ABS, Airbag,Engine Cooling module, Instrument Cluster, Electronic Climate Control,Body Control Unit, just to name a few examples.
Since Opel uses manypin in the OBD connector, the diagnostic interface works as amultiplexer, and selects the appropriate pin for communication.
Since Opel uses manypin in the OBD connector, the diagnostic interface works as amultiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
Fault codes will be shown with all available information:
Fault codes will be shown with all available information:
Full fault code text description
Full status information (Present, Not present, Intermittent)
You can print out, save, or copy the fault codes to any other application. Full status information (Present, Not present, Intermittent)
From the fault codes window, you can go directly to the measuring blocks window.
Theprogram shows you measuring block information on many control module,you can choose anything from the list on your own. The program iscapable of showing 8 measuring block parameter simultaneously. Thesample rate is depends mostly on the communication protocol. Forexample, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can bevery slow, during communication, while newer Multec, or Bosch units arefaster (using KWP-2000), and the newest CAN based control units are veryfast!
You can also run output tests on many controllers.
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
.jpg)
