Thrust ball bearings consist of the washers with raceway and the assembly of ball and cage. The washer that contacts the shaft is called shaft washer, and the one attached to the housing is called housing washer. Thrust bearings in double directions have a central washer connected to the shaft.
GWG bearing uses the best steel to assure our good quality. Every procedure is closely examined by our experienced technicians and worker
BEARING NO. | DIMENSIONS(mm) | Rated load (kN) | Speed Limit (r/min) | Weight (kg) | Remarks | ||||
d | D | T | Ca | Coa | Grease lubrication | Oillubrication | |||
F3-8 | 3 | 8 | 4 | 0.72 | 0.9 | 9100 | 11700 | 0.0012 | |
F4-9 | 4 | 9 | 4 | 0.72 | 0.84 | 8800 | 11400 | 0.0013 | |
F4-10 | 4 | 10 | 4 | 0.72 | 0.84 | 8800 | 11400 | 0.0014 | |
F5-10 | 5 | 10 | 4 | 0.72 | 0.79 | 8800 | 11400 | 0.0014 | |
F5-11 | 5 | 11 | 4.5 | 1.7 | 1.81 | 8500 | 11100 | 0.0015 | |
F5-12 | 5 | 12 | 4 | 0.72 | 0.79 | 8500 | 11100 | 0.0014 | |
F6-12 | 6 | 12 | 4.5 | 1.9 | 1.96 | 8200 | 10800 | 0.0015 | |
F6-14 | 6 | 14 | 5 | 1.9 | 1.96 | 8200 | 10800 | 0.0016 | |
F7-13 | 7 | 13 | 4.5 | 1.9 | 1.96 | 8200 | 10800 | 0.0015 | |
F7-15 | 7 | 15 | 5.5 | 1.9 | 1.974 | 7900 | 10500 | 0.0016 | |
F7-17 | 7 | 17 | 6 | 2.8 | 2.95 | 8100 | 10300 | 0.00017 | |
F8-16 | 8 | 16 | 5 | 1.9 | 1.943 | 7800 | 10300 | 0.0016 | |
F8-19 | 8 | 19 | 7 | 3.5 | 3.85 | 7600 | 10200 | 0.0018 | |
F8-22 | 8 | 22 | 7 | 3.5 | 3.85 | 7600 | 10200 | 0.0019 | |
F9-17 | 9 | 17 | 5 | 1.8 | 1.898 | 7800 | 10300 | 0.0015 | |
F9-19 | 9 | 19 | 6.5 | 2.6 | 2.764 | 7300 | 9900 | 0.0018 | |
F9-20 | 9 | 20 | 7 | 3.5 | 3.85 | 7300 | 9900 | 0.0019 | |
F10-18 | 10 | 18 | 5.5 | 1.2 | 1.229 | 7300 | 9900 | 0.0016 |