Timber transporting truck

This model is a special type of vehicle developed for the wood transportation in the forested area. The driving styles of the complete vehicle are divided into 6×6; 6×4; 8×4 and 8×8. The models include rigid truck and towing trailer. The complete vehicle adopts CNHTC National III emission series of STEYR engine with internationally most advanced technical features. The complete vehicle is "energy saving, green and efficient". The typical characteristics of this series of engine are as follows: high reliability, high power, larger torque, low emission, low oil consumption and low noise. The advanced assembly including Fuller9, HW18710 transmission, STEYR reinforced rear driving axle and imported steering gear box and so on is the standard configuration of the truck.

The vehicle-mounted grip machine has large lifting tonnage and the working radius reaches more than 5.7m. The grab is simple which greatly improves the working efficiency. It is especially suitable for loading of 7-9.5M raw wood or plates. The all wheel drive mode is applicable for the more rigorous pavement environment.

Main features



Vehicle model: ZZ1252S5851F

Maximum total mass:25000 (kg)

Kerb weight: 10000 (kg)

Wheelbase:5800+1350 (mm)

Engine model: WD615.47

Transmission: ZF5S-150GP

Driving axle: hub reduction rear axle of axle ratio 5.73

Cab: STEYR half high roof cab

Tire: 12.00R20

Fuel tank capacity: 380( L )main fuel tank + 200 (L )additional fuel tank

Vehicle-mounted grappling: total mass of the grapple: 3186 kg, working radius: 5700 mm, maximum arm length: 7000 mm, maximum grabbed diameter: 800 mm, maximum grabbed mass: 800 kg