Specification
Computerized strength tester is used to test different kinds of metal materials (steel wire, nets, pipe, etc), timber, artificial board and facing man-made board according to different Physical-chemical properties. It meets the standard requirements and does inside combinative strength test, surface combinative strength test, surface agglutination strength test, agglutination strength test, Static curve strength test, elastic modulus test, screw force test and so on.
Detail Information
It is the ideal testing equipment for different levels of quality inspection departments and manufacturers to produce wood and artificial board and can provide accurate test results. This machine is controlled by digital controller of computer system, Motor rotation is controlled by speed adjustment system, then complete sample's various Mechanical testing by speed slower system carry out the up and down action of movable crossbeam through precise reduction system to slow it down.
Technical Parameter
Max test power | 30kN |
Test power range | 0.4%-100% |
Test power indicated value precision | Superior of indicated value±1% |
Test power resolution | 1/300000 no divided class or in six classes |
Beam displacement measurement accuracy | Resolution is higher than 0.0025mm |
Deformation measurement precision | ±0.05%(0.2-10mm) |
test speed range | 0.01-500mm/min, no-stage timing |
Speed controlled precision | ±1%(0.01-10mm/min); ±0.5%(10-500mm/min) |
Constant, Permanent deformation, Constant displacement control range | 0.2%-100%FS |
constant, Permanent deformation, Constant displacement control precision | Setting value< 10%FS, within±1%, ≥10%FS, within±1% |
Deformation rate control precision | Speed rate<0.05%FS, within±2.0% in setting value. ≥0.05%FS, within 0.5% in setting value. |
Test space | Tensile space:600mm Compression space: 700mm width:400mm |
Fixture | inside combinative strength test Fixture, surface combinative strength test Fixture, surface agglutination strength test Fixture, agglutination strength test Fixture, Static curve strength test Fixture, elastic modulus test Fixture, screw force test Fixture, 7 fixtures in total |
Machine power | Single phase,220v±10%,50hz,. Power: 2KW |
Working environment | Inside temperature—35°C, Relative Humidity not more than 80% |
dimensions(W×D×H)-Main Unit | 760×510×1800mm (W×D×H) |
Weight | Standard type: 260Kg |
Remark
This type of Tenslile Tester is used to test the pulling, bursting, pressing, shearing testing item of different kinds of materials. If required, we can install or unistall the computer for you.
