Features of SI pneumatic cylinders:
1) Three points positioning and precisely machined head caps and pistons done by imported 3-D CNC machine, fundamentally solved tradtional pneumatic cylinder working problems of climbing and quivering.
2) With self lubricating bearing, the piston rod is lubrication free
3)Adjustable cushion on both end covers to make sure the cylinder works very smoothly and with low noise
4) Magnet and sufficient fixin styles are available.
SI Pneumatic Cylinder Description
1) Three points positioning and precisely machined head caps and pistons done by imported 3-D CNC machine, fundamentally solved tradtional pneumatic cylinder working problems of climbing and quivering.
2) With self lubricating bearing, the piston rod is lubrication free
3)Adjustable cushion on both end covers to make sure the cylinder works very smoothly and with low noise
4) Magnet and sufficient fixin styles are available.
SI Pneumatic Cylinder Description
| Cylinder Diameter(mm) | 32 | 40 | 50 | 63 | 80 | 100 | 125 | 160 | 200 | 250 | 320 | |
| Acting Mode | Doubic Acting | |||||||||||
| Working Medium | Air | |||||||||||
| Fixting type | Basic type FA FB CA CB LB TC TC-M | |||||||||||
| Rod end fitting type | Basic type TY TI TF TB | |||||||||||
| Working pressure(MPa) | 0.1 to 0.9 | |||||||||||
| MAX.Pressure(MPa) | 1.35 | |||||||||||
| Working temperature( ) | -5 to 70 | |||||||||||
| Speed range(mm's) | 50~800 | |||||||||||
| Cushion type | Adjustable Cushion | |||||||||||
| Cushion stroke(mm) | 24 | 32 | ||||||||||
| Joint Size(mm) | G 1/8 | G 1/4 | G 3/8 | G 1/2 | G3/4 | |||||||
How to order SI pneumatic cylinder:
SI pneumatic cylinder Inner Sturectue:
SI air cylinder Drawings:
.jpg)
