High precision self-aligning ball bearings

Self-aligning ball bearings :

 

The self-aligning ball bearing has two rows of balls and a common concave sphered raceway in the outer ring. The bearing is consequently self-aligning and insensitive to angular misalignments of the shaft relative to the housing. It is particularly suitable for applications where considerable shaft deflections or misalignment are to be expected. Additionally, the self-aligning ball bearing has the lowest friction of all rolling bearings, which enables it to run cooler even at high speeds.
We produces self-aligning ball bearings to several designs. These are

1.     open bearings of the basic design
2.     sealed bearings
3.     open bearings with an extended inner ring
 
This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
 
We also supply:
1200 ETN9 series
1201 ETN9 series
......
1218 ETN9 series
 
1200 EkTN9 series
1201 EkTN9 series
......
1218 EkTN9 series