PE carbon spiral reinforcing pipe extrusion line
· special configuration polyolefin single screw extruder, extrusion with a high-speed, high-speed characteristics of speed, and so on.
· Separate dedicated mixing screw and spiral structure of the nose, a reasonable flow, smooth-walled tubes and outside.
· Sizing specially designed cooling method: the production of the scope of 50-200mm, the production rate of up to 0.6-1.5 m / min.
· head tube standard design
· spiral distribution of shunt-type body, a large space of flows to ensure that the melt has sufficient duration.
· low melting temperature of the best design, pipe stress small, internal and external surface.
· high flexibility, is applicable to all the co-extruded polyolefin material can be squeezed out the second floor, three different specifications to enhance the use of spiral pipe.
Optimal Design of spiral copper sizing can be set with the entrance end of pre-cooling device and powerful vacuum suction device applied to the high-speed pipe extrusion
· specially designed spray head brought about by efficient cooling spray.
· vertical movement motor regulation, up and down about three-dimensional adjustment can be achieved.
· stainless steel produced by the body.
· efficient pumps and a special spray head brought about by efficient cooling spray.
· special configuration polyolefin single screw extruder, extrusion with a high-speed, high-speed characteristics of speed, and so on.
· Separate dedicated mixing screw and spiral structure of the nose, a reasonable flow, smooth-walled tubes and outside.
· Sizing specially designed cooling method: the production of the scope of 50-200mm, the production rate of up to 0.6-1.5 m / min.
· head tube standard design
· spiral distribution of shunt-type body, a large space of flows to ensure that the melt has sufficient duration.
· low melting temperature of the best design, pipe stress small, internal and external surface.
· high flexibility, is applicable to all the co-extruded polyolefin material can be squeezed out the second floor, three different specifications to enhance the use of spiral pipe.
Optimal Design of spiral copper sizing can be set with the entrance end of pre-cooling device and powerful vacuum suction device applied to the high-speed pipe extrusion
· specially designed spray head brought about by efficient cooling spray.
· vertical movement motor regulation, up and down about three-dimensional adjustment can be achieved.
· stainless steel produced by the body.
· efficient pumps and a special spray head brought about by efficient cooling spray.
SJ-65/30B | ||
Nose | Φ50-200 | Φ50-125 |
Sizing sink | SGZL-200 | SGZL-125 |
Tractor | SLQ-200 | SLQ-200 |
Winding Machine | SQ-200 | SQ-200 |
