OPTICS: MAXILUME LED Optilux technology combines unmatched performance with visual comfort. Spun 0.05" thick reflector has been designed to gather the light scattered by the LED chip and shape it into functional beams that minimize brightness and glare, while eliminating lamp image. Proprietary dual level upper and lower reflector design allows for two different light distributions (Flood • Spot), design capabilities are endless and unrestricted. Engineered superior quality, light engine; consuming less 21 watts and producing 1121 lumens.PERFORMANCE: Operating system consumes only 21 watts of power and puts out 1150 usable lumens with a 4100K (daylight) color temperature while our 3000K LED chip (warm white) produces more than 970 lumens. All MAXILUME LED luminaries are rated at 85+ CRI and 3,000 degrees Kelvin. Our stringent chip specifications require only those Chips that produce no ultra violet and virtually no infrared. All LED luminaries are rated and tested to LM-79 and LM-80 standards by an independent laboratory.
THERMAL MANAGEMENT SYSTEM: Using a proprietary cooLED Advanced Thermodynamic Design, Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Heat sink is attached to top of housing. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradeable. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat form the LED chip, allowing continued cool operation for years. Life tests have shown the MAXILUME light engine output will be maintained at 70% of initial at 50,000 hours of operation.
DIMMABILITY: This LED lighting system is fully dimmable down to 5% initial light output system is dimmable with a 0-10 Mvolt dimmer. Daylight harvesting, programmed controls, etc. will require load compensating dimmers. 120v can also be dimmed down to 15% of initial light output using standard incandescent wall dimmer (Produces 10% less intial lumens than Mvolt Version).
MOUNTING FRAME: Die-formed all die-cast construction for maximum heat dissipation and rust protection.
LED DRIVER / JUNCTION BOX: The LED driver is rated for 50 to 60Hz at 120V /277V input, produces less than 20%THD, and has a power factor between 90% and 100% and is thermally protected for additional safety. MAXILUME's LED driver is installed on the junction box cover so it may be serviced from below the ceiling. UL Listed for through-branch circuit wiring, provided with four ½" knockouts, one ¾" knockout and four Romex knockouts with true pryout slots and strain clamps. Designed for straight through conduit runs. Driver is installed on the junction box cover so it may be serviced from below the ceiling.
MOUNTING BRACKET: Constructed from 16 gauge steel and is supplied with C-channel that are adjustable up to 28". Mounting bracket maybe adjusted up to 2-¾" vertically from inside the housing.
LENS: Your Choice of either clear tempered or tempered frosted lens fastened with two torsion springs.
WARRANTY: The MAXILUME LED lighting system is warranted for 10 years. As a system, we stand behind the entire MAXILUME products from housing to bar hangers
.jpg)
