1.CAPACITY:
Pile Hole of one mtr Depth 30 mtrs in Alluvial soil, Auger drilling by separated Mud Pump.
2.PRIME POWER:
Power for Hydraulic taken from tractor engine through transfer gearbox.
3.WORK METHOD:
Rotation with direct circulation, nucleus destruction with bleeding by water, air or foam.
4.MAST:
Medium duty channel structure with forward dumping option up to 1mtr.
5.ROD HANDLING CAPACITY:
3mtr drill rods of 4 ½" OD.
6.HYDRAULIC SYSTEM:
Tractor Engine at Max drives the hydraulic system. Operating Pressure of 2250 psi (160kg/cm2) and it consists of 3 Pumps, Hydraulic oil Tank, Coolers, Hoses, Filter, Etc,.
7.HYDRAULIC OIL COOLER:
Hydraulic oil cooler of adequate capacity with hydraulic motor is provided for maintaining the operating system in ambient temperature.
8.PULL UP AND PULL DOWN:
By means Hydraulic Cylinder – Ratio 1:1
Max. Pull up Force 8591 kgs
Max. Pull up Speed 37 mtrs/min
Max. Pull down Force 5897 kgs
Max. Pull down Speed 53 mtrs/min
9.ROTARY HEAD:
Two powers heavy-duty Rotary head specially made for pile drilling Hydraulic Motor with water swivel at bottom entry.
Max. Torque 606 kg-mtr
Max. Speed: 0 to 80 rpm
10. JACKS:
Total unit supported by 4 Hydraulic Box Type Jacks.
11. BREAK OUT WRENCH:
To open the drill joints Hydraulic break out wrench of 350 mm stroke will be provided with rope attached.
12. CENTRALIZER:
The Rig includes centralizer with swing out provision with 10" opening.
13. TOOLS:
The Required tools in scope of supply provided for general operation and Maintenance of the rig.
14. CONTROL PANEL:
Control panel will be provided with all gauges of drill rig, Engine Etc, at the Panel Board and are accessible for the operator. Locking arrangements will be provided for the safety of the control panel.
15. MOUNTING:
The above total rig unit is mounted on a NEW HOLLAND 4*4 75HP Tractor supply by you.
.jpg)
