Material:
stainless steel AISI 304
thickness: cylinder 3mm, bottom 4mm
Inner surface treatment:
cold-rolled plates 4mm-thickness, 2B surface treatment, welds grinded to Ra 0,8µm.
External surface treatment:
cold-rolled plates grinded to SB.
Heating:
Cylinder: steam-heating section - max. pressure 4 bars
Conical bottom: steam-heating section - max. pressure 4 bars
Insulation:
Rockwool - thickness 100 mm, both cylinder and conical bottom
External-Jacket:
Stainless steel plate - thickness 1,5 mm, both cylinder and conical bottom
Mash Tun is stainless steel vertical, double-walled, insulated vessel with dished head insulated with polyurethane in the top portion and rock-wool in the steam-heating sections area.
Mash Tun has a 15° conical floor with inverted center for agitator seal. A bottom mounted mash agitator system incorporates offset paddles to ensure thorough mixing of the mash. Paddles are driven by geardrive-motor and are controlled by an AC variable frequency drive.
Mash hydration unit, into which enters an auger transporting malt from grist case, is mounted to the tank head and provides complete hydration of grain.
Vessel heating is provided by two independently controlled steam-heating section with heating capacity 1°C per minute and steam pressure of 4 bar at 150°C temperature. Inlet of steam into heating-sections is controlled from central control panel by electrically operated solenoid valves, depending on temperature and speed of heating. Temperature in the vessel is controlled by thermo-sensor installed in the lower cylindrical part and evaluated by the control system.
A 500 mm round man-way-cover and vent-chimney are placed on the top of dished head.
Tank is equipped in the dished-head with a rotating mechanical sprayball for thorough washing and sanitation.
stainless steel AISI 304
thickness: cylinder 3mm, bottom 4mm
Inner surface treatment:
cold-rolled plates 4mm-thickness, 2B surface treatment, welds grinded to Ra 0,8µm.
External surface treatment:
cold-rolled plates grinded to SB.
Heating:
Cylinder: steam-heating section - max. pressure 4 bars
Conical bottom: steam-heating section - max. pressure 4 bars
Insulation:
Rockwool - thickness 100 mm, both cylinder and conical bottom
External-Jacket:
Stainless steel plate - thickness 1,5 mm, both cylinder and conical bottom
Mash Tun is stainless steel vertical, double-walled, insulated vessel with dished head insulated with polyurethane in the top portion and rock-wool in the steam-heating sections area.
Mash Tun has a 15° conical floor with inverted center for agitator seal. A bottom mounted mash agitator system incorporates offset paddles to ensure thorough mixing of the mash. Paddles are driven by geardrive-motor and are controlled by an AC variable frequency drive.
Mash hydration unit, into which enters an auger transporting malt from grist case, is mounted to the tank head and provides complete hydration of grain.
Vessel heating is provided by two independently controlled steam-heating section with heating capacity 1°C per minute and steam pressure of 4 bar at 150°C temperature. Inlet of steam into heating-sections is controlled from central control panel by electrically operated solenoid valves, depending on temperature and speed of heating. Temperature in the vessel is controlled by thermo-sensor installed in the lower cylindrical part and evaluated by the control system.
A 500 mm round man-way-cover and vent-chimney are placed on the top of dished head.
Tank is equipped in the dished-head with a rotating mechanical sprayball for thorough washing and sanitation.
