SN- 280S FINGERLESS TYPE SINGAL FACER
A) Design speed: 80m/min
B) Effective width: 1400mm- 2200mm
C) Corrugated roller: 280mm
D) Drive reducer box with oil immersed type lubricating
To reduce noise keep running stable. Adopt gimbal
Transmission. Separate power
E) Corrugating roller, pressure roller and glue roller by
Pneumatic adjustment
F) Cardboard transmit adopt vacuum suction method, with
Wind control system. Keep flute profiles stable of the
Lower-roller in the condition of running up.
G) Bearing of corrugated and pressure roller adopt
High temperature lubricate grease.
H) Glue parts auto supply glue circularly.
I) The upper-lower corrugating roller are made of 52crmo
High quality alloy steel, after heat-treatment. The hardness
HRC58-60, THE SURFACE BE GRINDED
J) The glue part surface are treated by special mesh
Nicked and chrome plated.
k) Motorized or manual glue width dividing to match
The paper width.
L) Glue part can be running independently or non-independently while.
Adopt main motor frequency conversion control. (Optional)
Technical specification:
Working width: max 1400mm, min: 700mm
Designed speed: 100m/min, normal work speed: 80m/min
Working pressure: 0.6-0.9Mpa Steam work pressure: 0.9-1.3Mpa
Steam consumption: 0.5-0.8t/h Temperature requirements: 160-200°C
Machine power: 26.2kw
Working power: 380V, 50Hz
Dimension: 3200mm*1500mm*1800mm
Structure characteristic:
1. Cardboard transmitting method adopts wind absorption, and keep flute profiles stable under the running condition of high speed.
2. The wind machine absorbs corrugated paper to corrugated rollers through vacuum box and form corrugated profile.
3. The width of wind groove of lower roller is not exceeding 2mm, and will less fringe marks of single corrugated paperboard.
4. Transmission part adopt gimbal transmission, away from vibration source, and make the transmission more steady and reliable, and easy to maintain.
5. The speed reducing box is oil-lubricating, close gear transmission, and will reduce machine vibration.
6. Glue unit adopts auto-supply glue circularly, pneumatically reset and has buffering effect.
7. Glue area will be electrically adjusted, glue unit can be running independently when machine steppes, and prevent glue running out.
8. Upper corrugated roller surface are treated by special mesh snicked and chrome plated.
