The Tech-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2010.
Specification:
1.Features
1)Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
2)Support for on-board diagnostics on all GM systems 1992 thru current year.
3)Removable hardware modules provide insurance against scan tool obsolescence.
4)Large, easy-to-read backlit screen.
5)RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
6)Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
7)Ability to view the status of vehicle diagnostic tests as they run.
8)Bi-directional The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
9)Vetronix Tech 2 Specifications
10)Dimensions: 12
11)Microprocessor: 32 bit,16 MHz
12)Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion.
13)Communications: Integral RS232 communication port.
14)Screen: 3.8.8 backlit monochrome with full graphics capability: 320,40 pixels. Displays up to 9 vehicle parameters at once .Download Tech2 Brochure (5.2 Mb)
2)Support for on-board diagnostics on all GM systems 1992 thru current year.
3)Removable hardware modules provide insurance against scan tool obsolescence.
4)Large, easy-to-read backlit screen.
5)RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
6)Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
7)Ability to view the status of vehicle diagnostic tests as they run.
8)Bi-directional The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
9)Vetronix Tech 2 Specifications
10)Dimensions: 12
11)Microprocessor: 32 bit,16 MHz
12)Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion.
13)Communications: Integral RS232 communication port.
14)Screen: 3.8.8 backlit monochrome with full graphics capability: 320,40 pixels. Displays up to 9 vehicle parameters at once .Download Tech2 Brochure (5.2 Mb)
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications,even those vehicles using other platforms such as OBD I and OBD II.
.jpg)
