Applications
Heavy Wall Heat Shrink Tubing have properties of excellent insulating, environmental sealing, and resistant to impact and abrasion for applications to seal and protect electrical and communication connections, providing excellent mechanical protection to cable joints and terminations, 3:1 shrink ratio allows it easily fit over irregular shape and large connectors.
WHST is recommended to apply for light cable and wire harnesses, where requiring waterproofing, protection of connector components, and thus encapsulates and seals components contained within the tubing.
Features
>Resistant to UV-radiation
>High electrical insulation
>Superior mechanical property
>Minimum fully recovery temperature: 120C
>Standard color: Black
Technical Data
Property | Test Method | Typical Data |
Operating temperature | IEC 216 | -55C to +110C |
Tensile strength | ASTM D 2671 | ≥14MPa |
Tensile strength after aging (150C/168hrs.) | ASTM D 2671 | ≥12MPa |
Elongation at break | ASTM D 2671 | ≥400% |
Elongation at break after aging (150C/168hrs.) | ASTM D 2671 | ≥300% |
Density | ASTM D 792 | 1.05g/cm3 |
Longitudinal shrinkage | UL 224 | 0 to -10% |
Dielectric strength | IEC 243 | ≥20kV/mm |
Volume resistance | IEC 93 | 1014Ω.cm >10 Ω.cm |
Eccentricity | ASTM D 2671 | <30% |
Copper stability | ASTM D 2671 | Pass |
Resistance to stress cracking (50C) | ASTM D 1693 | No cracking |
Water absorption (23C/ 14days) | ISO 62 | <0.15% |
Thermoplastic Adhesive
Property | Test Method | Typical Data |
Water absorption | ISO 62 | <0.2% |
Softening point | ASTM D E28 | 85C |
Peel strength (PE) | DIN 30672 | 4 N/cm |
Copper stability | ASTM D 2671 | Non-corrosive |
Resistance to fungus and decay | ISO 846 | Pass |
Product Dimension
Normal size (mm) | As supplied(mm) | After recovered (mm) | Tube shape | Standard length | |
Inside diameter (Min.) | Inside diameter (Max.) | Wall thickness (Min.) | |||
WHST-A 9/3 | 9 | 3 | 1.8 | O | 1000-1500mm |
WHST-A 13/4 | 13 | 4 | 2.4 | O | 1000-1500mm |
WHST-A 22/6 | 22 | 6 | 2.7 | O | 1000-1500mm |
WHST-A 33/ 8 | 33 | 8 | 3.2 | O | 1000-1500mm |
WHST-A 40/12 | 40 | 12 | 4.1 | O | 1000-1500mm |
WHST-A 45/12 | 45 | 12 | 4.1 | O | 1000-1500mm |
WHST-A 55/16 | 55 | 16 | 4.1 | O | 1000-1500mm |
WHST-A 75/ 22 | 75 | 22 | 4.1 | O | 1000-1500mm |
WHST-A 85/ 25 | 85 | 25 | 4.3 | O | 1000-1500mm |
WHST-A 95/ 30 | 95 | 30 | 4.3 | O | 1000-1500mm |
WHST-A 105/ 30 | 105 | 30 | 4.3 | O | 1000-1500mm |
WHST-A 130/ 36 | 130 | 36 | 4.3 | — | 1000-1500mm |
WHST-A 160/50 | 160 | 50 | 4.3 | — | 1000-1500mm |
WHST-A 180/50 | 180 | 50 | 4.3 | — | 1000-1500mm |
WHST-A 200/60 | 200 | 60 | 4.3 | — | 1000-1500mm |
Notes:
1. WHST-A is with Hot Melting Adhesive, Without Adhesive product(WHST) is available upon request.
2. Special size, cutting pieces are available upon request.
3. Tube shape: "O" : Round or Oval, "—" : Flat
