Single Screw and Barrel for Plastic Extruder Machine
Specification:
Diameter: Ø15-Ø500
L/D ratio:15-55
Base Materials: | 1)38CrMoAlA(SACM 645) 2)42CrMo(AISI 4140) 3)Cr12MoV(SKD11) 4)4Cr5MoSiV1(SKD61) 5)9Cr18MoV 6)40Cr 7)DC53 (JIS G4404) |
Bimetallic Alloy Materials: | 1)Fe-based alloy 2)Ni-based alloy 3)Co-based alloy 4)NiCo-based alloy 5)Wolfram carbide |
Bimetallic alloy level | Alloy powder including 40% Wolfram Carbon Alloy powder including 25% Wolfram Carbon Alloy powder including 9.5% Wolfram Carbon |
Processing Technology: | PTA Heat treatment High-frequency quenching Nitriding treatment Hard-chrome electroplating Bimetallic alloy welding |
Technical Parameter:
| Nitrided layer depth:0.50-0.80mm Nitrided hardness: 950-1100HV Nitrided brittleness: Less than 2 level Surface roughness: Ra 0.4μm Linearity of screw: 0.015mm/m Hard-chrome plating hardness after nitriding: ≥950HV Chrome-plating layer depth: 0.025~0.10mm Bimetallic layer depth: 3 mm Bimetallic hardness: HRC60-70 |
Suitable Plastic Material: | PP, PE, PVC, ABS, AS, PS etc. |
Terms and Conditions | Means of transport: Ocean, Air, Express |
Production time:About 20-30 days after we receive the advanced payment |
We can manufacture all types of screws and barrels according to clients' requirement.
Product classification:
According to different raw materials and products the screw can be chosen: general type, pin type, barrier type, separation type, and gas-exhausting/vented type, etc.
Application: Granules, film, bag, barrel, pipe, profile, plates,sheet, etc.
