For fastening:
Pipe lines,such as heating,sanitary and waste water pipes,to walls,cellings and floors.
Properties:
| Material | steel DD11(material no.1.0332) acc.to DIN EN 10111 |
| Zinc plating | electro zinc plated,6-8µm |
| Resistance welded nut | M8(sw 13),H=6.8mm,8.0mm,12.0mm |
| Resistance welded nut | M8/10(sw 13),H=17.0mm |
| Resistance welded nut | M8/10(sw 17),H=18.0mm |
| Resistance welded nut | M10(sw 17),H=10.0mm |
| Resistance welded nut | M10/12(sw 17),H=18.0mm available |
| Locking screw | combi-slot cheese head screw |
| Acoustic insulation lining | material:EPDM;chlorine-free;silicone-free |
| Sound insulation | for DIN 4109 |
| Temperature range | -50° to +110°C |
| Hardness | 45+-5° Shore |
| Fire behavior | DIN 4102:class B2 |
Facility:
Stamping machines, punching machines,bending machines,welding machines, lathes and so on.
Avantages:
1.Compact structural design of the clamp enables simple and full piping insulation without larger overlap in the area of the toggle and closing device. All this is possible even using a small thickness of insulating material.
2.It prevents the action of electrolysis.
3.Two-screw pipe clamps satisfy the highest requirements while mounting on walls, ceilings and floors but also in connection with pipes used in sanitary installations.
4.Side screws are protected against loss during assemble with the help of plastic washers.
Usage:
1.steel pipes
2.cast iron pipes
3.copper pipes
4.glass pipes
5.plastic pipes
Field:
1.sanitary and heating installations
2.gas distribution systems
3.air conditioning systems
Technical data:
.jpg)
.jpg)
