LC17-B T.L jones elevator light
1.Anti-jamming performance strong light, without interference from sunlight and other light sources;
2.New ultra sensitive, 96 infrared beams to provide the greatest degree of protection;
3.Using the high-tech design high reliability of MCU control chip, product performance and stability;
4.Fast automatic diagnosis failure protection functions, intelligent identification shielding fault light beam;
5.With integrated cable interface and special cables, resistant and more than 20 million times;
6.Product appearance design appearance, more accessible for on-site debugging installation;
7.To select the PNP and NPN no power signal output;
Items | Technical Parameters |
Beams Number | 94 beams (infrared) |
Sensors Number | 17 pairs (refer to pictures) |
Sensors Interval | 117 mm (refer to pictures) |
Beams Center Points Interval | 10.5mm/11.5mm (refer to pictures) |
Scanning Form | Line by line |
Response Time | 61msec(relating to detecting points of scanning cycle) |
Detecting Height | 25-1860mm |
Detecting Range | 0~3m moving door |
Light Immunity | 100,000lux(visible light) |
Allowable Deviation Angle | ≤10° |
Allowable Deviation Position | Vertical: ±10mm/7° |
Horizontal: ±5mm/5° | |
Protecting States | Cable fault |
Power fault | |
Current Consumption | Less than100mA |
Protection Grade | IP65 standard |
Ambient Temp. | -20°C~ +70°C |
Storage Temperature | -40°C~ +80°C |
Other functions | One transmitter is shielded after 120s' blocking |
Indicator | Power (green LED) |
System fault/beams blocked(orange LED) | |
Shell Material | Aluminum alloy surface spray plastic(black) |
Shell Cover (light filter) | Embedded installation of infrared penetrating for blocking off non-infrared |
Authentication | TUV CE(EMC) |
Working Voltage | 200~240VAC or 12-30VDC |
Power supply | 220VAC or 24VDC |
T.L jones elevator light curtains
Two in one safety edge, need to please with me on, as shown in the figure:
Product packaging:
220V power box specifications | |
Dimensions | 120mm(l) *67mm (w) *45mm (h) |
Input voltage | 220VAC±20% 50/60HZ |
Power requirements | 4VA |
Skin material | Flame retardant plastics |
Relay type | Normally open, COM port, 1 Group 1 group normally closed |
Relay voltage and capacity | 250V AC 7A or 30V DC 7A |
Work status is displayed | Red LED indicates power status Green LED indicates the light curtain output status |
Buzzer switch (optional) | Through power box switch adjustment ON/OFF |
Electromagnetic compatibility EMC | EN12015, EN12016 |
We are China Elevator Light Curtain (Elevator Door Infrared Detectors) manufacturer offer best Elevator Door Infrared Detectors OEM & ODM service.
